VOLKSWAGEN VENTO (A5) 2.5L 20V 125kW/168HP ME7.1.1

ECU BOSCH ME7.1.1 · 170 CV (125 kW) · 2500 cc · Benzina aspirato

ECU-databaseVOLKSWAGEN › VOLKSWAGEN VENTO (A5) 2.5L 20V 125kW/168HP ME7.1.1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkVOLKSWAGEN
ModelVENTO (A5)
Motor2.5L 20V 125kW/168HP ME7.1.1
Standaard vermogen170 CV / 125 kW
Cilinderinhoud2500 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.1.1
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Speed / RPM limiter
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Speed limiter
  • Air mass flow

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612015021037383981 1.42.00407K906032BF 0603 BOSCH ME7.1.1
02612016791037390701 1.84.01907K906032BM 0711 BOSCH ME7.1.1
02612088571037380985 1.42.01007K906032H 0610 BOSCH ME7.1.1
02612088581037380894 1.42.00607K906032J 0610 BOSCH ME7.1.1

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata