VOLKSWAGEN TRANSPORTER (T5) 3.2L VR6 FSI 173kW/232HP ME7.1.1 — ECU BOSCH ME7.1.1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 7 firmwareversies

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand

Ben je een garage of tuner?

Voertuiggegevens

Merk	VOLKSWAGEN
Model	TRANSPORTER (T5)
Motor	3.2L VR6 FSI 173kW/232HP ME7.1.1
Standaard vermogen	235 CV / 173 kW
Cilinderinhoud	3200 cc
Brandstof	Benzina aspirato
Voertuigtype	LCV

ECU

Fabrikant	BOSCH
Model	ME7.1.1
Geheugen / EPROM	29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

Advance at part load
Load / throttle position reference
Injection at part load
Advance limiter
Torque limiter
Lambda enrichment for components protection
Knock detection factor

Firmware-identificatoren (7)

Hardware-nr.	Software-nr. (chip)	Versie	Update-software	ECU
0261201267	1037380056	1.21.010	022906032JA 8694	BOSCH ME7.1.1
0261201270	1037381602	1.21.003	022906032JD 8697	BOSCH ME7.1.1
0261201945	1037386671	1.21.008	022997032Q 0842	BOSCH ME7.1.1
0261206736	1037354790	1.21.008	022906032F 0004	BOSCH ME7.1.1
0261208072	1037372816	1.21.009	022906032 7001	BOSCH ME7.1.1
0261208752	1037371708	1.21.016	022906032GM 6367	BOSCH ME7.1.1
0261S04649	1037396293	1.21.009	022906032MK 3035	BOSCH ME7.1.1

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport € 215 Buy

Rapid FR - Modulo Aggiuntivo Dimsport € 189 Buy

→ See all add-on modules on the shop

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand Ben je een garage of tuner?Bied deze diensten zelf aan: activeer je TuningFile-platform

Tools om deze ECU te lezen en schrijven

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Kopen

The Genius OBD + Bench € 2.500 Kopen

Andere VOLKSWAGEN

GOLF 3 (A3)
2.8L VR6 128kW/172HP MOTRONIC GOLF 3 (A3)
2.0L 8V 85kW/114HP BOSCH GOLF 3 (A3)
2.0L 16V 110kW/148HP 5WP4 GOLF 3 (A3)
1.4L 8V 44kW/59HP MOTRONIC GOLF 3 (A3)
1.6L 8V 55kW/74HP MOTRONIC GOLF 3 (A3)
1.8L 8V 66kW/89HP MOTRONIC GOLF 3 (A3)
1.9L TDI 66kW/89HP DIL PASSAT 3 (B3)
1.6L 8V 54kW/72HP MOTRONIC PASSAT 3 (B3)
1.8L 8V 81kW/109HP MOTRONIC PASSAT 3 (B3)
1.9L TDI 66kW/89HP EDC 1.3.3

→ Alle ECU's VOLKSWAGEN