VOLKSWAGEN TOUAREG (7L) 4.2L V8 228kW/306HP ME7

ECU BOSCH ME7.1.1 · 310 CV (228 kW) · 4200 cc · Benzina aspirato

ECU-databaseVOLKSWAGEN › VOLKSWAGEN TOUAREG (7L) 4.2L V8 228kW/306HP ME7

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 11 firmwareversies

Voertuiggegevens

MerkVOLKSWAGEN
ModelTOUAREG (7L)
Motor4.2L V8 228kW/306HP ME7
Standaard vermogen310 CV / 228 kW
Cilinderinhoud4200 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.1.1
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow

Firmware-identificatoren (11)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612080071037367525 1.42.0154D0907560BQ 0050 BOSCH ME7.1.1
02612080071037369021 1.42.0094D0907560BQ 0070 BOSCH ME7.1.1
02612080091037369030 1.42.0064D0907560BR 0020 BOSCH ME7.1.1
02612080091037367701 1.42.0044D0907560BR 0010 BOSCH ME7.1.1
02612080091037378164 1.42.0084D0907560BR 0030 BOSCH ME7.1.1
02612080091037381243 1.42.0044D0907560BR 0040 BOSCH ME7.1.1
02612083481037368034 1.42.0094D0907560DA 0020 BOSCH ME7.1.1
02612083481037374360 1.42.0044D0907560DA 0050 BOSCH ME7.1.1
02612085451037370941 1.42.0054D0907560DB 0010 BOSCH ME7.1.1
02612085451037371756 1.42.0134D0907560DB 0020 BOSCH ME7.1.1
02612089521037377002 1.42.0084D0907560DF 0020 BOSCH ME7.1.1

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata