VOLKSWAGEN SHARAN 1 2.8L V6 24V 150kW/201HP ME7.1/7.5

ECU BOSCH ME7.1.1 · 204 CV (15 kW) · 2800 cc · Benzina aspirato

ECU-databaseVOLKSWAGEN › VOLKSWAGEN SHARAN 1 2.8L V6 24V 150kW/201HP ME7.1/7.5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 9 firmwareversies

Voertuiggegevens

MerkVOLKSWAGEN
ModelSHARAN 1
Motor2.8L V6 24V 150kW/201HP ME7.1/7.5
Standaard vermogen204 CV / 15 kW
Cilinderinhoud2800 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.1.1
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Knock correction advance max
  • Load / throttle position reference
  • Basic value Lambda sensor
  • Torque limiter
  • Lambda enrichment for components protection
  • Lambda reference
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Air mass flow
  • Driver torque request

Firmware-identificatoren (9)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612084371037368650 1.21.004022906032EJ 5525 BOSCH ME7.1.1
02612068161037360628 1.21.024022906032G 0011 BOSCH ME7.1/3
02612073821037362920 1.21.004022906032AQ 0005 BOSCH ME7.1/3
02612073841037362915 1.21.005022906032AR 0005 BOSCH ME7.1/3
02612073861037372942 1.21.014022906032AS 0005 BOSCH ME7.1/3
02612073861037362338 1.21.004022906032AS 0004 BOSCH ME7.1/3
02612080101037367570 1.21.005022906032CT 0003 BOSCH ME7.1/3
02612084361037368649 1.21.004022906032EH 5523 BOSCH ME7.1/3
02612066001037352823 1.21.01406A906032AK 3567 BOSCH ME7.5

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata