VOLKSWAGEN POLO 4 (9N) 1.4L 16V FSI 62kW/83HP ME7.5.11

ECU BOSCH MED7.5.11 · 84 CV (62 kW) · 1400 cc · Benzina aspirato

ECU-databaseVOLKSWAGEN › VOLKSWAGEN POLO 4 (9N) 1.4L 16V FSI 62kW/83HP ME7.5.11

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 2 firmwareversies

Voertuiggegevens

MerkVOLKSWAGEN
ModelPOLO 4 (9N)
Motor1.4L 16V FSI 62kW/83HP ME7.5.11
Standaard vermogen84 CV / 62 kW
Cilinderinhoud1400 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelMED7.5.11
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Air mass flow

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
0261S010111037367205 1.21.01303C906013B 4884 BOSCH MED7.5.11
0261S010511037382611 1.21.01303C997013 9500 BOSCH MED7.5.11

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.