VOLKSWAGEN POLO 3 (6N) 1.6L 8V 55kW/74HP ME7.5.10

ECU BOSCH ME7.5.10 · 75 CV (55 kW) · 1600 cc · Benzina aspirato

ECU-databaseVOLKSWAGEN › VOLKSWAGEN POLO 3 (6N) 1.6L 8V 55kW/74HP ME7.5.10

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 8 firmwareversies

Voertuiggegevens

MerkVOLKSWAGEN
ModelPOLO 3 (6N)
Motor1.6L 8V 55kW/74HP ME7.5.10
Standaard vermogen75 CV / 55 kW
Cilinderinhoud1600 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.5.10
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Load/throttle position reference - AT
  • Air mass flow

Firmware-identificatoren (8)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.21.00206A906032JC 4979 BOSCH ME7.5.10
02612073191037366348 1.21.00506A906032JC 4686 BOSCH ME7.5.10
02612076531037363479 1.21.009032906032 2402 BOSCH ME7.5.10
02612076531037362939 1.21.001032906032 2403 BOSCH ME7.5.10
02612078891037367225 1.21.004032906032E 2503 BOSCH ME7.5.10
02612081081037367589 1.21.006032906032F 2603 BOSCH ME7.5.10
02612087361037379533 1.21.004032906032L 2803 BOSCH ME7.5.10
02612087361037372804 1.21.006032906032L 2802 BOSCH ME7.5.10

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.