VOLKSWAGEN PASSAT 8 (B8) 2.0L L4 16V TDI 110kW/148HP EDC17C74

ECU BOSCH EDC17C74 · 150 CV (11 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseVOLKSWAGEN › VOLKSWAGEN PASSAT 8 (B8) 2.0L L4 16V TDI 110kW/148HP EDC17C74

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 19 firmwareversies

Voertuiggegevens

MerkVOLKSWAGEN
ModelPASSAT 8 (B8)
Motor2.0L L4 16V TDI 110kW/148HP EDC17C74
Standaard vermogen150 CV / 11 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC17C74
Geheugen / EPROMMICRO ST TRICORE - 32768 - 400000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost limiter correction for APS/BPS sensor
  • Protection for cylinder head overheating
  • Engine load - ceiling
  • Maximum torque limitation at clutch
  • Regeneration limit for DPF
  • EGR valve control
  • Max accepted exhaust gas temperature value before turbine
  • Max accepted exhaust gas temperature value before turbine 2
  • Protection for engine overheating
  • Protection for engine overheating 2
  • Basic torque management at engine cranking
  • Injection period
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection period 6
  • Injection period - correction
  • Maximum injection period
  • Injection opening time related to inj. pressure
  • Initialization values over pressure control valve
  • Injection 1
  • J
  • Injection 3
  • Boost pressure deviation limits for overboost detection
  • Boost pressure deviation limit for underboost detection
  • Boost pressure deviation limit for underboost detection 2
  • Torque limiter
  • Smoke limiter
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation 2
  • Speed limiter
  • Speed limiter 2
  • Maximum indicated torque for monitoring
  • Maximum engine torque at crank shaft
  • Protection for air load overheating
  • Protection for exhaust gas temperature before turbine
  • Protection for exhaust gas temperature before turbine 2
  • Protection for fuel overheating
  • Protection for fuel overheating 2
  • Protection for oil overheating
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Specific injection pressure limiter 3
  • Specific injection pressure limiter for EFT sensor
  • Relative permissible torque from the pedal position in torque limitation
  • Maximum pressure ratio limit depending on temperature
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific air mass charge 2
  • Air mass flow
  • Driver torque request
  • Driver torque request for reverse gear
  • CAT downstream temperature sensor characterization
  • CAT upstream temperature sensor characterization
  • DPF downstream temperature sensor characterization
  • Turbo upstream temperature sensor characterization
  • Setpoint maximum turbocharger speed
  • Overboost timing
  • Overboost timing 2
  • Overboost timing 3
  • Overboost timing 4
  • Turbocharger volumetric efficiency

Firmware-identificatoren (19)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.94.01104L906026DP 2076 BOSCH EDC17C74
1.94.02404L906026AT 0888 BOSCH EDC17C74
1.94.01804L906026DP 1538 BOSCH EDC17C74
1.94.02704L906026KD 4798 BOSCH EDC17C74
1.94.02104L906026AT 1148 BOSCH EDC17C74
1.94.01504L906026GB 2078 BOSCH EDC17C74
1.94.01504L906026ES 7760 BOSCH EDC17C74
1.94.03004L906026AS 1147 BOSCH EDC17C74
1.94.00904L906026DM 2937 BOSCH EDC17C74
1.94.02004L906026ET 1343 BOSCH EDC17C74
1.94.00804L906026LQ 5172 BOSCH EDC17C74
1.94.01004L906026DN 2938 BOSCH EDC17C74
1.94.02004L906026GB 1622 BOSCH EDC17C74
1.94.00504L906026ET 7761 BOSCH EDC17C74
1.94.00304L906026ES 1342 BOSCH EDC17C74
1.94.02504L906026ES 1989 BOSCH EDC17C74
1.94.01604L906026ET 1990 BOSCH EDC17C74
1.94.02104L906026FQ 2077 BOSCH EDC17C74
1.94.01504L906026CA 2023 BOSCH EDC17C74

ECU-notities

MICRO Infineon Tricore TC1793 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata