VOLKSWAGEN NEW BEETLE 2.5L 20V 110kW/148HP ME7.5

ECU BOSCH ME7.5 · 150 CV (11 kW) · 2500 cc · Benzina aspirato

ECU-databaseVOLKSWAGEN › VOLKSWAGEN NEW BEETLE 2.5L 20V 110kW/148HP ME7.5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 2 firmwareversies

Voertuiggegevens

MerkVOLKSWAGEN
ModelNEW BEETLE
Motor2.5L 20V 110kW/148HP ME7.5
Standaard vermogen150 CV / 11 kW
Cilinderinhoud2500 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.5
Geheugen / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • RPM Limiter
  • Knock detection factor
  • Speed limiter
  • Speed limiter 2
  • Air mass flow

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612088711037377823 1.42.01407K906032B 7828 BOSCH ME7.5
02612088721037377824 1.42.01207K906032C 7829 BOSCH ME7.5

ECU-notities

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata