VOLKSWAGEN NEW BEETLE 1.8L 20V TURBO 110kW/148HP ME7.5

ECU BOSCH ME7.5 · 150 CV (11 kW) · 1800 cc · Benzina sovralimentato

ECU-databaseVOLKSWAGEN › VOLKSWAGEN NEW BEETLE 1.8L 20V TURBO 110kW/148HP ME7.5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 31 firmwareversies

Voertuiggegevens

MerkVOLKSWAGEN
ModelNEW BEETLE
Motor1.8L 20V TURBO 110kW/148HP ME7.5
Standaard vermogen150 CV / 11 kW
Cilinderinhoud1800 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.5
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • P
  • Max boost pressure control
  • Load/throttle position reference - AT
  • Air mass flow

Firmware-identificatoren (31)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612049421037350279 1.21.03206A906032E 2730 BOSCH ME7.5
02612065061037352339 1.21.01506A906032C 3077 BOSCH ME7.5
02612065071037352472 1.21.01706A906032A 3157 BOSCH ME7.5
02612065971037352383 1.21.01206A906032CK 3099 BOSCH ME7.5
02612067391037360106 1.21.01406A906032CN 3592 BOSCH ME7.5
02612068901037368009 1.21.00606A906032DL 0006 BOSCH ME7.5
02612069111037354830 1.21.01106A906032DN 3556 BOSCH ME7.5
02612071131037360104 1.21.02706A906032EM 3594 BOSCH ME7.5
02612072251037360110 1.21.01206A906032FD 3595 BOSCH ME7.5
02612072661037360982 1.21.0151C0906032 0001 BOSCH ME7.5
02612073411037362333 1.21.01906A906032FT 3996 BOSCH ME7.5
02612073431037362336 1.21.01006A906032GA 3998 BOSCH ME7.5
02612073441037362334 1.21.01506A906032GB 3997 BOSCH ME7.5
02612073491037360345 1.21.01006A906032GQ 3749 BOSCH ME7.5
02612073511037362332 1.21.01006A906032FS 3995 BOSCH ME7.5
02612073901037362330 1.21.01106A906032HH 3993 BOSCH ME7.5
02612076231037362391 1.21.00606A906032JR 3999 BOSCH ME7.5
02612079101037363916 1.42.01406A906032KR 4527 BOSCH ME7.5
02612079101037366816 1.42.00906A906032KR 4743 BOSCH ME7.5
02612079111037363918 1.42.00906A906032KQ 4528 BOSCH ME7.5
02612079121037363917 1.42.01506A906032KS 4526 BOSCH ME7.5
02612079151037363921 1.42.00906A906032LS 4529 BOSCH ME7.5
02612082161037368320 1.42.01206A906032QA 5268 BOSCH ME7.5
02612082181037367966 1.42.01306A906032PS 5107 BOSCH ME7.5
02612084991037369086 1.42.01406A906032RT 5496 BOSCH ME7.5
02612085201037369042 1.42.01106A906032RS 5433 BOSCH ME7.5
02612085431037372012 1.42.00906A906032QT 6477 BOSCH ME7.5
02612085551037372011 1.42.00806A906032QS 6481 BOSCH ME7.5
02612085571037372151 1.42.01306A906032RA 6480 BOSCH ME7.5
02612085571037371172 1.42.00806A906032RA 6323 BOSCH ME7.5
0261S041331037394732 1.42.01206A906012R 2711 BOSCH ME7.5

Technische voertuignotities

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.