SKODA FABIA Mk2 (5J) 1.6L 16V TDI 77kW/103HP PCR2.1 CONTINENTAL

ECU CONTINENTAL-SIEMENS-VDO PCR2.1 · 105 CV (77 kW) · 1600 cc · Diesel sovralimentato

ECU-databaseSKODA › SKODA FABIA Mk2 (5J) 1.6L 16V TDI 77kW/103HP PCR2.1 CONTINENTAL

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 20 firmwareversies

Voertuiggegevens

MerkSKODA
ModelFABIA Mk2 (5J)
Motor1.6L 16V TDI 77kW/103HP PCR2.1 CONTINENTAL
Standaard vermogen105 CV / 77 kW
Cilinderinhoud1600 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelPCR2.1
Geheugen / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • Maximum torque limitation at clutch
  • EGR valve control
  • Scaling factor for driver requested torque at clutch
  • Injection opening time related to inj. pressure
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Torque limiter for smoke limitation
  • Torque limiter at high EGT
  • Speed limiter
  • Main injection
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Air mass flow
  • Driver torque request for high speed Sport mode - AT
  • Driver torque request for high speed - AT
  • Driver torque request for low speed - AT
  • Driver torque request for low speed - MT
  • Driver torque request - MT

Firmware-identificatoren (20)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
CAYB03L906023LL 1.94.00503L906023LL 9970 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DN 1.94.01203L906023DN 7504 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LM 1.94.01303L906023LM 8791 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LN 1.94.00703L906023LN 8375 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LN 1.94.01303L906023LN 9970 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DN 1.94.01003L906023DN 9978 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LM 1.94.00203L906023LM 9983 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DP 1.94.00903L906023DP 9971 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LN 1.31.00503L906023LN 9978 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DN 1.31.00403L906023DN 9981 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LM 1.31.00303L906023LM 9980 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LN 1.94.00203L906023LN 9971 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LM 1.94.01203L906023LM 9972 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DP 1.94.00903L906023DP 7505 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023BF 1.94.00403L906023BF 9971 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023LN 1.31.00903L906023LN 9972 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DN 1.94.00403L906023DN 8887 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DP 1.94.00603L906023DP 9978 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023QF 1.31.00303L906023QF 9978 CONTINENTAL-SIEMENS-VDO PCR2.1
CAYC03L906023DP 1.94.00703L906023DP 8833 CONTINENTAL-SIEMENS-VDO PCR2.1

ECU-notities

TOTAL FILE MICRO Infineon Tricore TC1796 This Setting File can be used for serial system NewGenius. WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. WARNING - New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed via PATCH UNLOCK with New Trasdata plugin 513. After the unlock it is possible to reprogram the ECU through OBDII port with New Genius. To work on this ECU you can use NewTrasdata
PARTIAL FILE MICRO Infineon Tricore TC1796 This Setting File can be used for serial system NewGenius. WARNING - New Genius with security Dongle: the certified file present in the setting is a partial file and it cannot be used with the FULL OBD2 mode of the serial protocol FLASH_0365.In order to use the FULL OBD2 mode of the serial protocol FLASH_0365 it is necessary first to read the FULL ecu file with New Trasdata plugin 994 and send the .DIM file to the Race technical support for the verification.Alternatively, you can perform the PATCH UNLOCK with New Trasdata plugin 513 and then proceed with the OBD2+UNLOCK mode of the serial protocol FLASH_0365. WARNING - New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed via PATCH UNLOCK with New Trasdata plugin 513. After the unlock it is possible to reprogram the ECU through OBDII port with New Genius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop