SEAT TOLEDO (KG) 1.4L 12V TDI 66kW/89HP DCM6.2

ECU DELPHI DCM6.2V · 90 CV (66 kW) · 1400 cc · Diesel sovralimentato

ECU-databaseSEAT › SEAT TOLEDO (KG) 1.4L 12V TDI 66kW/89HP DCM6.2

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 1 firmwareversies

Voertuiggegevens

MerkSEAT
ModelTOLEDO (KG)
Motor1.4L 12V TDI 66kW/89HP DCM6.2
Standaard vermogen90 CV / 66 kW
Cilinderinhoud1400 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantDELPHI
ModelDCM6.2V
Geheugen / EPROMMicro BGA ST SPC5674 - 32768 Kbit -400000

Beschikbare tuning-opties:

  • Base timing
  • Base timing 2
  • Boost pressure limit control
  • Boost limiter correction for APS/BPS sensor
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • Boost pressure 4
  • Maximum torque limitation at clutch
  • EGR valve control
  • Max accepted exhaust gas temperature value before turbine
  • Idle torque management
  • Injection opening time related to inj. pressure
  • Torque limiter
  • Torque limiter for diagnostic
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation 2
  • Speed limiter
  • Max engine IMEP torque
  • Specific injection pressure limiter
  • Specific injection pressure limiter for diagnostics
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure 3
  • Q
  • Specific air mass charge 3
  • Specific air mass charge 4
  • Air mass flow
  • Driver torque request
  • Driver torque request 2
  • Setpoint maximum turbocharger speed
  • Maximum engine speed threshold for activating the turbo boost smoke limitation
  • Torque limiter for EFT sensor - negative correction
  • Torque limiter for turbocharger temperature
  • Torque limit table for ECT sensor - negative correction
  • Torque model - torque to fuel quantity conversion
  • Torque model - torque to fuel quantity conversion 2
  • Turbocharger volumetric efficiency

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
CUSB04B906027D 1.84.00604B906027D 9081 DELPHI DCM6.2V

ECU-notities

Microprocessor BGA SPC5674 This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop