SEAT TOLEDO (5P) 2.0L 16V TDI 103kW/138HP EDC16U1

ECU BOSCH EDC16U1 · 140 CV (103 kW) · 2000 cc · Diesel sovralimentato

ECU-databaseSEAT › SEAT TOLEDO (5P) 2.0L 16V TDI 103kW/138HP EDC16U1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 2 firmwareversies

Voertuiggegevens

MerkSEAT
ModelTOLEDO (5P)
Motor2.0L 16V TDI 103kW/138HP EDC16U1
Standaard vermogen140 CV / 103 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC16U1
Geheugen / EPROM29BL802C SSOP56 8Mbit - Flash 3_V 512K x 16

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Boost pressure 2
  • EGR valve control
  • Injection period at part load
  • Injection period at full throttle
  • Injection correction
  • Injection 1
  • Torque limiter 2
  • Torque limiter
  • Smoke limiter
  • Pre-injection basic value
  • Air mass flow
  • Overboost timing

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02810119091037370891 1.00.02303G906016FH 6185 BOSCH EDC16U1
02810122911037372726 1.00.01203G906016HE 7000 BOSCH EDC16U1

ECU-notities

Original EPROM SSOP 56 pins AMD 29BL802CB - Microprocessor MOTOROLA MPC555/6. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool. This Setting File can be used for serial system NewGenius.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop