SEAT LEON (1M) 1.8L 20V 92kW/123HP ME7.5

ECU BOSCH ME7.5 · 125 CV (92 kW) · 1800 cc · Benzina aspirato

ECU-databaseSEAT › SEAT LEON (1M) 1.8L 20V 92kW/123HP ME7.5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 5 firmwareversies

Voertuiggegevens

MerkSEAT
ModelLEON (1M)
Motor1.8L 20V 92kW/123HP ME7.5
Standaard vermogen125 CV / 92 kW
Cilinderinhoud1800 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.5
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Load/throttle position reference - AT
  • Air mass flow

Firmware-identificatoren (5)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612049691037354813 1.21.01006A906032CS 0005 BOSCH ME7.5
02612049701037354540 1.21.01306A906032CR 0004 BOSCH ME7.5
02612075331037360906 1.21.00806A906032EF 0001 BOSCH ME7.5
02612075341037363904 1.21.01006A906032EE 0002 BOSCH ME7.5
02612084511037370109 1.21.01006A906032SF 0001 BOSCH ME7.5

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.