SEAT IBIZA CUPRA 1.8L TURBO 115kW/154HP ME7.1/5 — ECU BOSCH ME7.1/5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 3 firmwareversies

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand

Ben je een garage of tuner?

Voertuiggegevens

Merk	SEAT
Model	IBIZA CUPRA
Motor	1.8L TURBO 115kW/154HP ME7.1/5
Standaard vermogen	156 CV / 115 kW
Cilinderinhoud	1800 cc
Brandstof	Benzina sovralimentato
Voertuigtype	Auto

ECU

Fabrikant	BOSCH
Model	ME7.1/5
Geheugen / EPROM	29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

Base timing
Advance at idle speed
Optimal spark timing/MBT
Boost pressure limiter
Boost pressure limit control
Height correction for boost pressure
Desired engine load calculation
Lambda correction for engine temperature after starting
Exhaust gas temperature
Lambda enrichment for components protection
RPM Limiter
Boost pressure linearization
Lambda driver wish
Knock detection factor
Maximum boost pressure load
Throttle air mass flow calculation
Manifold absolute pressure time delay
Characteristic manifold absolute pressure time constant of the LRS
Optimal engine moment
Offset tolerance depending on permissible torque
Relative permissible torque from the pedal position in torque limitation
Maximum pressure ratio limit depending on temperature
Driver torque request
Driver torque request Sport mode
Throttle angle management

Firmware-identificatoren (3)

Hardware-nr.	Software-nr. (chip)	Versie	Update-software	ECU
—	1037352176	1.21.002	6K0906032 0002	BOSCH ME7.1/5
—	—	1.21.007	—	BOSCH ME7.1/5
0261206023	1037352176	1.21.043	6K0906032 0002	BOSCH ME7.1/5

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand Ben je een garage of tuner?Bied deze diensten zelf aan: activeer je TuningFile-platform

Tools om deze ECU te lezen en schrijven

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Kopen

The Genius OBD + Bench € 2.500 Kopen

Andere SEAT

CORDOBA
1.6L 8V 56kW/75HP MOTRONIC CORDOBA
1.8L 8V 66kW/88HP MOTRONIC IBIZA (6K)
1.4L 8V 44kW/59HP MOTRONIC IBIZA (6K)
1.6L 8V 55kW/74HP MOTRONIC IBIZA (6K)
1.3L 8V 40kW/54HP MOTRONIC IBIZA (6K)
1.8L 8V 66kW/88HP MOTRONIC IBIZA (6K)
2.0L 8V 85kW/114HP SIEMENS TOLEDO (1M)
1.6L 8V 54kW/73HP MOTRONIC TOLEDO (1M)
2.0L 8V 85kW/114HP DIGIFANT 1.7 TOLEDO (1M)
2.0L 16V 110kW/147HP 5WP 4201

→ Alle ECU's SEAT