SEAT EXEO 2.0L 16V TFSI 150kW/200HP FR MED9.1/5

ECU BOSCH MED9.1/5 · 204 CV (15 kW) · 2000 cc · Benzina sovralimentato

ECU-databaseSEAT › SEAT EXEO 2.0L 16V TFSI 150kW/200HP FR MED9.1/5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 1 firmwareversies

Voertuiggegevens

MerkSEAT
ModelEXEO
Motor2.0L 16V TFSI 150kW/200HP FR MED9.1/5
Standaard vermogen204 CV / 15 kW
Cilinderinhoud2000 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelMED9.1/5
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Advance at idle speed
  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Load / throttle position reference
  • Injection at part load
  • Speed / RPM limiter
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • RPM Limiter
  • Knock detection factor
  • P
  • Max boost pressure control
  • Air mass flow

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
0261S026841037400841 1.58.0103R0907115 0010 BOSCH MED9.1/5

ECU-notities

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata WARNING! ECU MED9 - IX/CL = injection at full load, decrease the values to enrich the injection

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop