Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
1 firmwareversies
Voertuiggegevens
| Merk | SEAT |
| Model | ATECA (KH7/5FP) |
| Motor | 2.0L 16V TDI 85kW/114HP MD1CS004 |
| Standaard vermogen | 116 CV / 85 kW |
| Cilinderinhoud | 2000 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | MD1CS004 |
| Geheugen / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte |
Beschikbare tuning-opties:
- Boost pressure limiter
- Boost limiter correction for APS/BPS sensor
- Maximum torque limitation at clutch
- Basic torque management at engine cranking
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period limit
- Injection opening time related to inj. pressure
- Injection 2
- Injection 3
- Injection 4
- Torque limiter 2
- Torque limiter 3
- Torque limiter 4
- Torque limiter
- Smoke limiter
- Lambda reference
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 3
- Lambda value of the smoke limitation 4
- Speed limiter
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 4
- Specific air mass charge
- Specific air mass charge 2
- Q
- Specific air mass charge 4
- Driver torque request
- Driver torque request 2
- Setpoint maximum turbocharger speed
- Overboost timing
- Turbocharger volumetric efficiency
Firmware-identificatoren (1)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | — |
1.02.015 | 05L906022BM 0965 |
BOSCH MD1CS004 |
Technische voertuignotities
ECU located in the engine bay behind/close to the battery. Difficulty: easy
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU-notities
Micro Infineon Tricore TC298TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
