Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 8 firmwareversies
Voertuiggegevens
| Merk | SEAT |
| Model | ALHAMBRA (7N) |
| Motor | 2.0L 16V TDI 85kW/114HP EDC17C46 |
| Standaard vermogen | 116 CV / 85 kW |
| Cilinderinhoud | 2000 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | EDC17C46 |
| Geheugen / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
Beschikbare tuning-opties:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Regeneration limit for DPF
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- EGR valve control 5
- Max accepted exhaust gas temperature value before turbine
- Protection for engine overheating
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Engine idle vs. ECT sensor
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection opening time related to inj. pressure
- Initialization values over pressure control valve
- Injection 1
- J
- Smoke limiter
- Lambda reference
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Speed limiter
- Max allowed torque for speed ratio
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific pressure injection after starting
- Driver torque request
- Driver torque request AWD
- Driver torque request for reverse gear
- Torque limiter for selected gear
- Torque limiter for selected gear 2
- Torque limiter for for reverse gear
- Setpoint maximum turbocharger speed
- Torque limiter for the APS/BPS
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
- Torque model - torque to fuel quantity conversion - particulate regeneration mode 2
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Firmware-identificatoren (8)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | — |
1.94.002 | 03L906018KT 3203 |
BOSCH EDC17C46 |
| — | — |
1.94.013 | 03L906018KS 1620 |
BOSCH EDC17C46 |
| — | — |
1.94.006 | 03L906018KT 9983 |
BOSCH EDC17C46 |
| — | — |
1.94.005 | 03L906018KT 9980 |
BOSCH EDC17C46 |
| — | — |
1.94.009 | 03L906018KT 9982 |
BOSCH EDC17C46 |
| — | — |
1.94.018 | 03L906018KT 4246 |
BOSCH EDC17C46 |
| — | — |
1.94.006 | 03L906018KT 1204 |
BOSCH EDC17C46 |
| — | — |
1.94.007 | 03L906018KT 8402 |
BOSCH EDC17C46 |
ECU-notities
MICRO Infineon Tricore TC1767 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation.
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
