SAAB 9-5 SERIES Mk1 2.3L 16V TURBO AERO 184kW/247HP TRIONIC T7

ECU SAAB TRIONIC T7 · 250 CV (184 kW) · 2300 cc · Benzina sovralimentato

ECU-databaseSAAB › SAAB 9-5 SERIES Mk1 2.3L 16V TURBO AERO 184kW/247HP TRIONIC T7

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 16 firmwareversies

Voertuiggegevens

MerkSAAB
Model9-5 SERIES Mk1
Motor2.3L 16V TURBO AERO 184kW/247HP TRIONIC T7
Standaard vermogen250 CV / 184 kW
Cilinderinhoud2300 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantSAAB
ModelTRIONIC T7
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Boost pressure
  • Load / throttle position reference
  • Injection at part load
  • Injection correction
  • Torque limiter
  • RPM Limiter
  • Max torque profile
  • Pressure control F (RPM)
  • Boost at full throttle
  • Overboost timing

Firmware-identificatoren (16)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
53810415388392 1.07.003 SAAB TRIONIC T7
53811735381405 1.07.005 SAAB TRIONIC T7
53811735388368 1.07.007 SAAB TRIONIC T7
53826685382890 1.07.002 SAAB TRIONIC T7
53826685387675 1.07.010 SAAB TRIONIC T7
53826685384409 1.07.001 SAAB TRIONIC T7
53826845382908 1.07.006 SAAB TRIONIC T7
53831125386917 1.07.003 SAAB TRIONIC T7
53840605385752 1.07.002 SAAB TRIONIC T7
53840605387048 1.07.003 SAAB TRIONIC T7
53840865385471 1.07.002 SAAB TRIONIC T7
53845085384540 1.07.003 SAAB TRIONIC T7
538720455561852 1.07.003 SAAB TRIONIC T7
538723855560240 1.07.002 SAAB TRIONIC T7
5556316755564153 1.07.002 SAAB TRIONIC T7
5556563755569109 1.07.003 SAAB TRIONIC T7

ECU-notities

Original EPROM PSOP 44 pins 29F400BT. On this epron can be set a KEY. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21.
Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY.