RENAULT VEL SATIS 2.2L 16V dCi 110kW/148HP EDC15C3

ECU BOSCH EDC15C3 · 150 CV (11 kW) · 2200 cc · Diesel sovralimentato

ECU-databaseRENAULT › RENAULT VEL SATIS 2.2L 16V dCi 110kW/148HP EDC15C3

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 12 firmwareversies

Voertuiggegevens

MerkRENAULT
ModelVEL SATIS
Motor2.2L 16V dCi 110kW/148HP EDC15C3
Standaard vermogen150 CV / 11 kW
Cilinderinhoud2200 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC15C3
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Injection at part load
  • Injection at full throttle
  • Torque limiter 2
  • Torque limiter
  • Smoke limiter
  • Specific injection pressure limiter
  • Specific injection pressure
  • Air mass flow
  • Overboost timing

Firmware-identificatoren (12)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02810106371037363204 1.05.0031037366010 BOSCH EDC15C3
02810106371037363204 1.05.0051037374457 BOSCH EDC15C3
02810106371037363204 1.05.0071037363517 BOSCH EDC15C3
02810109921037367107 1.05.0051037370505 BOSCH EDC15C3
02810113251037367179 1.05.0021037374110 BOSCH EDC15C3
02810113251037367179 1.05.0021037374114 BOSCH EDC15C3
02810113251037367179 1.05.0021037367637 BOSCH EDC15C3
02810113251037367179 1.05.0061037368475 BOSCH EDC15C3
02810115711037368957 1.00.0011037368955 BOSCH EDC15C3
02810117251037369187 1.05.0011037374114 BOSCH EDC15C3
02810117251037369187 1.05.0041037374113 BOSCH EDC15C3
02810117251037369187 1.05.0021037375591 BOSCH EDC15C3

ECU-notities

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius.

Aanvullende modules beschikbaar

→ See all add-on modules on the shop