RENAULT TWINGO 2 1.2L 16V TCE 74kW/99HP SIM32

ECU CONTINENTAL-SIEMENS-VDO SIM32 · 100 CV (74 kW) · 1200 cc · Benzina sovralimentato

ECU-databaseRENAULT › RENAULT TWINGO 2 1.2L 16V TCE 74kW/99HP SIM32

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 6 firmwareversies

Voertuiggegevens

MerkRENAULT
ModelTWINGO 2
Motor1.2L 16V TCE 74kW/99HP SIM32
Standaard vermogen100 CV / 74 kW
Cilinderinhoud1200 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSIM32
Geheugen / EPROMMicro RENESAS - 4096 Kbit - 80000

Beschikbare tuning-opties:

  • Base timing
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Boost pressure limiter
  • Boost pressure
  • Load / throttle position reference
  • Max torque correction factor for APS sensor
  • Factor to correct fuel delivery system
  • Factor to correct fuel delivery system 2
  • Acceleration enrichment
  • Rpm threshold fuel cut
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • RPM Limiter
  • Gear dependent maximum engine speed
  • RPM limit for ECT sensor
  • RPM limit for EOT sensor
  • Knock detection factor
  • Max torque profile
  • Volumetric efficiency
  • Volumetric efficiency - correction

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.73.017 CONTINENTAL-SIEMENS-VDO SIM32
82007006008200807588 1.73.0188200799147 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201015965 1.73.0158200799199 CONTINENTAL-SIEMENS-VDO SIM32
82007006008200807588 1.73.0108200799147 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201109657 1.73.0198200899441 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201015967 1.73.0178200799147 CONTINENTAL-SIEMENS-VDO SIM32

ECU-notities

Microprocessor SH7055 Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Microprocessor SH7055 Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata