Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
6 firmwareversies
Voertuiggegevens
| Merk | RENAULT |
| Model | SCENIC 3 |
| Motor | 1.5L 8V dCi 78kW/105HP SID301 |
| Standaard vermogen | 106 CV / 78 kW |
| Cilinderinhoud | 1500 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | CONTINENTAL-SIEMENS-VDO |
| Model | SID301/SID303/SID304 |
| Geheugen / EPROM | MICRO ST TRICORE - 12032 Kbit - 178000 |
Beschikbare tuning-opties:
- Boost pressure limiter
- BAP setpoint limitation depending on before particulate filter pressure in aftertreatment modes
- BAP setpoint limitation depending on before particulate filter pressure in regular injection mode
- Boost pressure
- Boost pressure 2
- Boost pressure in aftertreatment modes
- Boost pressure in regular injection mode
- Effective engine torque setpoint for safety
- Exhaust gas temperature value before turbine in regeneration mode
- Exhaust gas temperature value before turbine in regular injection mode
- Basic torque management at engine cranking
- Injection opening time related to inj. pressure
- Torque limiter for diagnostic
- Maximum torque correction in ECO mode to compensate resisting torque
- Maximum absolute effective torque
- Maximum indicated torque
- Maximum indicated torque in regeneration mode
- Main torque model during regular combustion mode
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Mass air flow - gear 1 (N or R)
- Air mass flow
- Mass air flow - gear 3
- Mass air flow - gear 4
- Mass air flow - gear 5
- Mass air flow - gear 6
- Air mass flow in aftertreatment modes
- Torque limiter for EFT sensor
- Torque limiter for intake manifold pressure
- Torque limiter for intake manifold pressure in regeneration mode
- Torque model - fuel quantity to torque conversion
- Torque model - fuel quantity to torque conversion - particulate regeneration mode
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
Firmware-identificatoren (6)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| 0037R | 0386R |
1.83.007 | 0798R |
CONTINENTAL-SIEMENS-VDO SID301/SID303/SID304 |
| 8200592611 | 8200565863 |
1.83.004 | 8201129022 |
CONTINENTAL-SIEMENS-VDO SID301/SID303/SID304 |
| 8200592611 | 8200565863 |
1.83.003 | 8200899093 |
CONTINENTAL-SIEMENS-VDO SID301/SID303/SID304 |
| 8200592611 | 8200565863 |
1.83.008 | 8200648286 |
CONTINENTAL-SIEMENS-VDO SID301/SID303/SID304 |
| 8200680832 | 8200847131 |
1.00.003 | 8201190447 |
CONTINENTAL-SIEMENS-VDO SID301/SID303/SID304 |
| 8200807626 | 8200843713 |
1.83.008 | 8201129022 |
CONTINENTAL-SIEMENS-VDO SID301/SID303/SID304 |
ECU-notities
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
