RENAULT SCENIC 3 1.5L 8V dCi 71kW/95HP SID305

ECU CONTINENTAL-SIEMENS-VDO SID305 · 97 CV (71 kW) · 1500 cc · Diesel sovralimentato

ECU-databaseRENAULT › RENAULT SCENIC 3 1.5L 8V dCi 71kW/95HP SID305

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 2 firmwareversies

Voertuiggegevens

MerkRENAULT
ModelSCENIC 3
Motor1.5L 8V dCi 71kW/95HP SID305
Standaard vermogen97 CV / 71 kW
Cilinderinhoud1500 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSID305
Geheugen / EPROMMICRO ST TRICORE - 12032 Kbit - 178000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • BAP setpoint limitation depending on before particulate filter pressure in regular injection mode
  • Boost pressure
  • Boost pressure 2
  • Boost pressure in regular injection mode
  • Effective engine torque setpoint for safety
  • Exhaust gas temperature value before turbine in regeneration mode
  • Exhaust gas temperature value before turbine in regular injection mode
  • Basic torque management at engine cranking
  • Injection opening time related to inj. pressure
  • Torque limiter for diagnostic
  • Maximum absolute effective torque
  • Maximum indicated torque
  • Maximum indicated torque in regeneration mode
  • Main torque model during regular combustion mode
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Maximum pressure ratio limit depending on temperature
  • Specific injection pressure
  • Specific injection pressure in aftertreatment modes
  • Air mass flow
  • Torque limiter for EFT sensor
  • Torque limiter for intake manifold pressure
  • Torque limiter for intake manifold pressure in regeneration mode
  • Torque model - fuel quantity to torque conversion
  • Torque model - fuel quantity to torque conversion - particulate regeneration mode
  • Torque model - torque to fuel quantity conversion - particulate regeneration mode

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
0033R0777R 1.83.0071986R CONTINENTAL-SIEMENS-VDO SID305
0669R1454R 1.83.0102868R CONTINENTAL-SIEMENS-VDO SID305

ECU-notities

MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop