Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 11 firmwareversies
Voertuiggegevens
| Merk | RENAULT |
| Model | MASTER 3 |
| Motor | 2.3L dCi 74kW/99HP EDC17C42 |
| Standaard vermogen | 101 CV / 74 kW |
| Cilinderinhoud | 2300 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | LCV |
ECU
| Fabrikant | BOSCH |
| Model | EDC17C42 |
| Geheugen / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
Beschikbare tuning-opties:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Maximum torque limitation at clutch
- Effective engine torque setpoint
- Effective engine torque setpoint for safety
- Max accepted exhaust gas temperature value before turbine
- Exhaust gas temperature value before turbine in regeneration mode
- Exhaust gas temperature value before turbine in regular injection mode
- Engine torque limit for transmission protection
- Max torque correction factor for APS sensor
- Max torque correction factor for APS sensor in aftertreatment modes
- Max torque correction factor for IAT sensor
- Max torque correction factor for IAT sensor in aftertreatment modes
- Injection opening time related to inj. pressure
- Torque limiter for diagnostic
- Maximum indicated torque
- Maximum indicated torque in regeneration mode
- Maximum indicated torque - safety condition
- Max exhaust gas temperature value before turbine in regeneration mode
- Max exhaust gas temperature value before turbine in regular injection mode
- Main torque model during regular combustion mode
- Specific injection pressure limiter
- Specific injection pressure limiter in aftertreatment modes
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Specific injection pressure in aftertreatment modes 2
- Air mass flow
- Air mass flow in aftertreatment modes
- Maximum temperature before turbine for diagnosis
- Torque limiter for the APS/BPS
- Torque limiter for the APS/BPS in aftertreatment modes
- Torque limiter for EFT sensor
- Torque limiter for intake manifold pressure
- Torque limiter for intake manifold pressure in regeneration mode
- Theoretical maximum engine power
- Theoretical maximum engine power 2
- Torque model - fuel quantity to torque conversion
Firmware-identificatoren (11)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
| 2265R | 1037526766 |
1.94.019 | 3123R |
BOSCH EDC17C42 |
| 2265R | 1037539001 |
1.94.003 | 4501R |
BOSCH EDC17C42 |
| 2265R | 1037534240 |
1.94.005 | 4016R |
BOSCH EDC17C42 |
| 2265R | 1037541730 |
1.94.003 | 4917R |
BOSCH EDC17C42 |
| 2265R | 10SW001382 |
1.94.002 | 7310R |
BOSCH EDC17C42 |
| 2265R | 1037535554 |
1.94.004 | 4046R |
BOSCH EDC17C42 |
| 2265R | 10SW006996 |
1.94.007 | 8497R |
BOSCH EDC17C42 |
| 2265R | 1037539020 |
1.94.013 | 4499R |
BOSCH EDC17C42 |
| 2265R | 1037533383 |
1.94.009 | 3689R |
BOSCH EDC17C42 |
| 2265R | 1037534252 |
1.94.002 | 4017R |
BOSCH EDC17C42 |
| 2265R | 1037547372 |
1.94.004 | 5909R |
BOSCH EDC17C42 |
ECU-notities
MICRO Infineon Tricore TC1767 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven