RENAULT MASTER 3 2.3L dCi 110kW/150HP SID321

ECU CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL · 150 CV (11 kW) · 2300 cc · Diesel sovralimentato

ECU-databaseRENAULT › RENAULT MASTER 3 2.3L dCi 110kW/150HP SID321

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 25 firmwareversies

Voertuiggegevens

MerkRENAULT
ModelMASTER 3
Motor2.3L dCi 110kW/150HP SID321
Standaard vermogen150 CV / 11 kW
Cilinderinhoud2300 cc
BrandstofDiesel sovralimentato
VoertuigtypeLCV

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSID321_CONTINENTAL
Geheugen / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbite

Beschikbare tuning-opties:

  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure
  • Boost pressure in aftertreatment modes
  • Maximum torque limitation at clutch
  • Compressor pressure ratio limit for pumping and speed
  • Effective engine torque setpoint for safety
  • Exhaust gas temperature value before turbine in regeneration mode
  • Exhaust gas temperature value before turbine in regular injection mode
  • Max torque correction factor for APS sensor
  • Max torque correction factor for APS sensor in aftertreatment modes
  • Max torque correction factor for soot mass
  • Max torque correction factor for soot mass in aftertreatment modes
  • Max torque correction factor for IAT sensor
  • Max torque correction factor for IAT sensor in aftertreatment modes
  • Basic torque management at engine cranking
  • Injection efficiency
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 3
  • L
  • Torque limiter
  • Torque limiter in full load
  • Torque limiter in Eco mode
  • Smoke limiter
  • Smoke limiter in aftertreatment modes
  • RPM Limiter
  • RPM limiter - AT
  • RPM limit for ECT sensor
  • Maximum absolute effective torque
  • Max exhaust gas temperature value before turbine in regeneration mode
  • Max exhaust gas temperature value before turbine in regular injection mode
  • Max force table for force to powertrain setpoint conversion
  • Specific injection pressure limiter
  • Specific injection pressure limiter in aftertreatment modes
  • Maximum pressure ratio limit depending on temperature
  • Specific injection pressure
  • Specific injection pressure in aftertreatment modes
  • Air mass flow
  • Driver torque request
  • Driver torque request Dynamic mode
  • Torque value tolerance between level 1 and level 2
  • Torque value tolerance between level 1 and level 2 - AT
  • Torque limiter for the APS/BPS in aftertreatment modes
  • Torque limiter in aftertreatment modes
  • Torque limiter in aftertreatment modes 2
  • Torque limiter for EFT sensor
  • Torque limiter in recovery mode
  • Torque model - fuel quantity to torque conversion
  • Torque model - fuel quantity to torque conversion 2
  • Torque model - fuel quantity to torque conversion in aftertreatment modes
  • Torque model - torque to fuel quantity conversion
  • Torque model - torque to fuel quantity conversion - particulate regeneration mode

Firmware-identificatoren (25)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
237010374V 1.83.011237610383V CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237019422S 1.83.005237619793S CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237018559S 1.83.009237618740S CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237016670S 1.83.013237616671S CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237018559S 1.83.045237618571S CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237015621S 1.83.006237616626S CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237011330V 1.83.009237611340V CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237015621S 1.83.015237616281S CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237019422S 1.83.009237619786S CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237019422S 1.83.016237619423S CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237011330V 1.83.012237611337V CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237011330V 1.83.010237611339V CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237011330V 1.83.010237611345V CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237010374V 1.83.009237610384V CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237018559S 1.83.009237618741S CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237019422S 1.83.011237619431S CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237018559S 1.83.011237619206S CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
237011008V 1.83.004237611014V CONTINENTAL-SIEMENS-VDO SID321_VITESCO
237010644V 1.83.009237611297V CONTINENTAL-SIEMENS-VDO SID321_VITESCO
237019305S 1.83.014237619560S CONTINENTAL-SIEMENS-VDO SID321_VITESCO
237019305S 1.83.013237610820V CONTINENTAL-SIEMENS-VDO SID321_VITESCO
237010644V 1.83.009237611298V CONTINENTAL-SIEMENS-VDO SID321_VITESCO
237011008V 1.83.011237611010V CONTINENTAL-SIEMENS-VDO SID321_VITESCO
237010644V 1.83.009237611295V CONTINENTAL-SIEMENS-VDO SID321_VITESCO
237019305S 1.83.002237619559S CONTINENTAL-SIEMENS-VDO SID321_VITESCO

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Microprocessor TC297TP_128 This Setting File can be used for serial system NewGenius.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):