RENAULT KANGOO 2 1.6L 16V 78kW/105HP SAGEM3000

ECU SAGEM S3000 · 106 CV (78 kW) · 1600 cc · Benzina aspirato

ECU-databaseRENAULT › RENAULT KANGOO 2 1.6L 16V 78kW/105HP SAGEM3000

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 2 firmwareversies

Voertuiggegevens

MerkRENAULT
ModelKANGOO 2
Motor1.6L 16V 78kW/105HP SAGEM3000
Standaard vermogen106 CV / 78 kW
Cilinderinhoud1600 cc
BrandstofBenzina aspirato
VoertuigtypeLCV

ECU

FabrikantSAGEM
ModelS3000
Geheugen / EPROMMicro RENESAS - 4096 Kbit - 80000

Beschikbare tuning-opties:

  • Base timing
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Load / throttle position reference
  • Max torque correction factor for APS sensor
  • Factor to correct fuel delivery system
  • Factor to correct fuel delivery system 2
  • Acceleration enrichment
  • Rpm threshold fuel cut
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • RPM Limiter
  • Gear dependent maximum engine speed
  • RPM limit for ECT sensor
  • RPM limit for EOT sensor
  • Knock detection factor
  • Max torque profile
  • Volumetric efficiency
  • Volumetric efficiency - correction

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
82005095168200864651 1.73.0148200488969 SAGEM S3000
82005095168201077834 1.73.0098201077833 SAGEM S3000

ECU-notities

Microprocessor SH7055 This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
ATTENTION!! On this car only serial reprogramming is possible. This Setting File can be used for serial system NewGenius. Microprocessor SH7075.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop