RENAULT TRUCK KERAX 450 10.8L 331kW/444HP TRW EMS2.2 V01

ECU TRW VOLVO EMS2.2 V01 · 450 CV (331 kW) · 10800 cc · Diesel sovralimentato

ECU-databaseRENAULT TRUCK › RENAULT TRUCK KERAX 450 10.8L 331kW/444HP TRW EMS2.2 V01

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 6 firmwareversies

Voertuiggegevens

MerkRENAULT TRUCK
ModelKERAX
Motor450 10.8L 331kW/444HP TRW EMS2.2 V01
Standaard vermogen450 CV / 331 kW
Cilinderinhoud10800 cc
BrandstofDiesel sovralimentato
VoertuigtypeTir

ECU

FabrikantTRW VOLVO
ModelEMS2.2 V01
Geheugen / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5554 16384 Kbit - 0x200000

Beschikbare tuning-opties:

  • Boost limiter correction for APS/BPS sensor
  • Boost limiter correction for APS/BPS sensor 2
  • Boost pressure demand regulator
  • Boost pressure
  • Boost pressure 2
  • Fuel angle compensation factor
  • Fuel angle compensation factor 2
  • Fuel injection compensation factor
  • Injection period
  • Injection period - engine start
  • Torque limiter
  • RPM Limiter
  • Minimum torque during catalyst temp reduction
  • NOx compensation factor
  • Torque limiter for intake manifold pressure
  • Torque limiter for intake manifold pressure 2
  • Torque limiter for intake manifold pressure in regeneration mode
  • Torque limiter in recovery mode
  • Torque limit table for ECT sensor
  • Turbine temperature compensation factor

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
20977019P0321109966P01 1.80.01821077447P01 TRW VOLVO EMS2.2 V01
20977019P0321109966P01 1.80.00821077425P01 TRW VOLVO EMS2.2 V01
20977019P0321109966P01 1.80.00421077433P01 TRW VOLVO EMS2.2 V01
20977019P0321276542P01 1.80.00421292943P01 TRW VOLVO EMS2.2 V01
20977019P0321109966P01 1.80.01021077429P01 TRW VOLVO EMS2.2 V01
21300122P0521906984P01 1.80.00522126075P01 TRW VOLVO EMS2.2 V01

ECU-notities

Microprocessor FMPC 5554 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata