PORSCHE CAYENNE (9PA) 4.8L V8 32V TURBO S 405kW/543HP VDO SDI4

ECU CONTINENTAL-SIEMENS-VDO SDI4 · 550 CV (405 kW) · 4800 cc · Benzina sovralimentato

ECU-databasePORSCHE › PORSCHE CAYENNE (9PA) 4.8L V8 32V TURBO S 405kW/543HP VDO SDI4

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 2 firmwareversies

Voertuiggegevens

MerkPORSCHE
ModelCAYENNE (9PA)
Motor4.8L V8 32V TURBO S 405kW/543HP VDO SDI4
Standaard vermogen550 CV / 405 kW
Cilinderinhoud4800 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSDI4
Geheugen / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Beschikbare tuning-opties:

  • Base timing
  • Lambda/AFR full load/WOT
  • Lambda/AFR full load/WOT - sport mode
  • Optimal spark timing/MBT
  • Lambda correction
  • Exhaust gas temperature
  • Torque limiter 2
  • Torque limiter
  • Lambda reference
  • Lambda driver wish
  • Knock detection factor
  • Max torque profile for IAT sensor
  • Air mass flow
  • Driver wish low range
  • Driver wish for high vehicle speeds
  • Driver wish for low vehicle speeds
  • Driver wish reverse gear
  • Driver wish Sport mode
  • Driver torque request

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
022906032MEWS2C603248MEA02 1.96.008 CONTINENTAL-SIEMENS-VDO SDI4
022906032MEWS2C603248MUA02 1.96.004 CONTINENTAL-SIEMENS-VDO SDI4

ECU-notities

MICRO Infineon Tricore TC1796 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop