PORSCHE BOXSTER (718) 2.0L 16V TURBO 184kW/247HP CONTINENTAL SDI21.X

ECU CONTINENTAL-SIEMENS-VDO SDI21.X · 250 CV (184 kW) · 2000 cc · Benzina sovralimentato

ECU-databasePORSCHE › PORSCHE BOXSTER (718) 2.0L 16V TURBO 184kW/247HP CONTINENTAL SDI21.X

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 6 firmwareversies

Voertuiggegevens

MerkPORSCHE
ModelBOXSTER (718)
Motor2.0L 16V TURBO 184kW/247HP CONTINENTAL SDI21.X
Standaard vermogen250 CV / 184 kW
Cilinderinhoud2000 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSDI21.X
Geheugen / EPROMMICRO INFINEON TRICORE - 32768 Kbit - 400000

Beschikbare tuning-opties:

  • Base timing
  • Base timing 2
  • Lambda/AFR full load/WOT
  • Advance correction for IAT sensor
  • Boost pressure
  • Desired engine load calculation
  • Lambda correction
  • Intake pressure protection
  • Torque limiter 2
  • Basic value setpoint Lambda sensor
  • Torque limiter
  • Lambda enrichment for components protection
  • RPM Limiter
  • RPM Limiter 2
  • Knock detection factor
  • Speed limiter
  • Speed limiter 2
  • Speed limiter 3
  • Max torque profile
  • Optimal engine moment
  • Maximum pressure ratio limit depending on temperature
  • Pop/blow off valve offset - close model
  • Pop/blow off valve offset - open model
  • Driver torque request

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
982906023BPW21H0020N5D31 1.96.0113466 CONTINENTAL-SIEMENS-VDO SDI21.X
982906023CGW21H2020N5D10 1.96.0053521 CONTINENTAL-SIEMENS-VDO SDI21.X
982906023CPW21H7020RUD07 1.96.0043746 CONTINENTAL-SIEMENS-VDO SDI21.X
982906023CQW21H7020RUM07 1.96.0053747 CONTINENTAL-SIEMENS-VDO SDI21.X
982906026NW21P0020ROM37 1.96.0093708 CONTINENTAL-SIEMENS-VDO SDI21.X
982906026TW21R1020LCD09 1.96.0033742 CONTINENTAL-SIEMENS-VDO SDI21.X

ECU-notities

MICRO Infineon Tricore TC1791 WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata