PEUGEOT RANCH / PARTNER 1.6L 16V 66kW/90HP ME7.4

ECU BOSCH ME7.4 · 90 CV (66 kW) · 1600 cc · Benzina aspirato

ECU-databasePEUGEOT › PEUGEOT RANCH / PARTNER 1.6L 16V 66kW/90HP ME7.4

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkPEUGEOT
ModelRANCH / PARTNER
Motor1.6L 16V 66kW/90HP ME7.4
Standaard vermogen90 CV / 66 kW
Cilinderinhoud1600 cc
BrandstofBenzina aspirato
VoertuigtypeLCV

ECU

FabrikantBOSCH
ModelME7.4
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Load/throttle position reference - AT
  • Air mass flow

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612069441037353689 1.32.013 BOSCH ME7.4

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial programming system NewGenius.