Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
16 firmwareversies
Voertuiggegevens
| Merk | PEUGEOT |
| Model | BOXER / MANAGER |
| Motor | 3.0L 16V JTD 115kW/155HP EDC16C39 |
| Standaard vermogen | 157 CV / 116 kW |
| Cilinderinhoud | 3000 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | LCV |
ECU
| Fabrikant | BOSCH |
| Model | EDC16C39 |
| Geheugen / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Beschikbare tuning-opties:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- EGR valve control
- Exhaust gas temperature
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection opening time related to inj. pressure
- Max injection limit
- Fuel quantity limitation after cold start
- Max injection limit - limp mode
- J
- Injection 2
- Torque limiter 2
- Torque limiter
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 3
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Driver torque request
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Volumetric efficiency
- Volumetric efficiency - correction
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Firmware-identificatoren (16)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| 0281012490 | 1037383452 |
1.67.026 | — |
BOSCH EDC16C39 |
| 0281014211 | 1037391915 |
1.67.021 | — |
BOSCH EDC16C39 |
| 0281014211 | 1037390598 |
1.67.013 | — |
BOSCH EDC16C39 |
| 0281014211 | 1037516204 |
1.67.011 | — |
BOSCH EDC16C39 |
| 0281014211 | 1037386379 |
1.67.016 | — |
BOSCH EDC16C39 |
| 0281014733 | 1037397508 |
1.67.008 | — |
BOSCH EDC16C39 |
| 0281014733 | 1037510732 |
1.67.007 | — |
BOSCH EDC16C39 |
| 0281014733 | 1037516203 |
1.67.022 | — |
BOSCH EDC16C39 |
| 0281014733 | 1037391758 |
1.67.032 | — |
BOSCH EDC16C39 |
| 0281014838 | 1037391912 |
1.67.021 | — |
BOSCH EDC16C39 |
| 0281014838 | 1037516202 |
1.67.018 | — |
BOSCH EDC16C39 |
| 0281014838 | 1037397502 |
1.67.019 | — |
BOSCH EDC16C39 |
| 0281015577 | 1037398949 |
1.67.018 | — |
BOSCH EDC16C39 |
| 0281015683 | 1037400395 |
1.67.019 | — |
BOSCH EDC16C39 |
| 0281015684 | 1037400194 |
1.67.004 | — |
BOSCH EDC16C39 |
| 0281015734 | 1037399693 |
1.67.040 | — |
BOSCH EDC16C39 |
Technische voertuignotities
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU-notities
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
