PEUGEOT BOXER / MANAGER 2.0L 16V BlueHDi 120kW/163HP DCM6.2C

ECU DELPHI DCM6.2C · 163 CV (12 kW) · 2000 cc · Diesel sovralimentato

ECU-databasePEUGEOT › PEUGEOT BOXER / MANAGER 2.0L 16V BlueHDi 120kW/163HP DCM6.2C

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 14 firmwareversies

Voertuiggegevens

MerkPEUGEOT
ModelBOXER / MANAGER
Motor2.0L 16V BlueHDi 120kW/163HP DCM6.2C
Standaard vermogen163 CV / 12 kW
Cilinderinhoud2000 cc
BrandstofDiesel sovralimentato
VoertuigtypeLCV

ECU

FabrikantDELPHI
ModelDCM6.2C
Geheugen / EPROMMICRO BGA FREESCALE MPC5674F - 32768 Kbit - 400000

Beschikbare tuning-opties:

  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure limit control
  • Boost pressure
  • Boost pressure 2
  • Boost pressure F (temperature)
  • Load / throttle position reference
  • Load / throttle position reference 2
  • Load / throttle position reference 3
  • Max exhaust gas temperature curve for full load
  • Basic torque management at engine cranking
  • Injection period
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection opening time related to inj. pressure
  • J
  • Injection 2
  • Injection 3
  • Injection 4
  • Injection 5
  • Torque limiter
  • Torque limiter for diagnostic
  • Torque limiter for smoke limitation
  • Maximum indicated torque
  • Maximum indicated virtual torque
  • Maximum engine power
  • Throttle air mass flow calculation
  • Max torque profile
  • Max torque profile - AT
  • Max torque profile for diagnostic
  • Max torque profile - MT
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific injection pressure 5
  • Driver torque request
  • Driver torque request for medium speed
  • Driver torque request for low speed
  • Driver torque request from MAP sensor
  • Driver torque request at the start
  • Driver torque request for reverse gear
  • Torque limiter for gear-shift too long
  • Torque limiter for selected gear
  • Torque limiter for the APS/BPS
  • Torque limit table for IAT sensor
  • Torque limiter for EFT sensor
  • Torque limit table for EOT sensor
  • Torque limit table for the rail pressure demand
  • Torque limit table for ECT sensor
  • Take-off torque law from MAP sensor

Firmware-identificatoren (14)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
98094477809692274280 1.00.0079693427980 DELPHI DCM6.2C
98094477809693294580 1.00.0129693294580 DELPHI DCM6.2C
98094477809696050280 1.00.0029696050280 DELPHI DCM6.2C
98094477809692274280 1.00.0059693644980 DELPHI DCM6.2C
98094477809693085580 1.00.0089693645180 DELPHI DCM6.2C
98094477809694269680 1.00.0049694269680 DELPHI DCM6.2C
98094477809693085580 1.00.0119693294580 DELPHI DCM6.2C
98094477809692365980 1.00.0119692775280 DELPHI DCM6.2C
98094477809692775280 1.00.0189692775280 DELPHI DCM6.2C
98094477809692366180 1.00.0119692895380 DELPHI DCM6.2C
98094477809692895380 1.00.0089692895380 DELPHI DCM6.2C
98094477809692366180 1.00.0189693427980 DELPHI DCM6.2C
98094477809692366180 1.00.0109693427980 DELPHI DCM6.2C
98094477809693644880 1.00.0259693644880 DELPHI DCM6.2C

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

Microprocessor BGA FREESCALE MPC5674F This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata