Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 14 firmwareversies
Voertuiggegevens
| Merk | PEUGEOT |
| Model | 4007 |
| Motor | 2.2L 16V HDI 115kW/156HP EDC16CP39 |
| Standaard vermogen | 156 CV / 115 kW |
| Cilinderinhoud | 2200 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | EDC16CP39 |
| Geheugen / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Beschikbare tuning-opties:
- Boost pressure in aftertreatment modes
- EGR valve control
- Exhaust gas temperature
- Exhaust gas temperature 2
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection opening time related to inj. pressure
- Max injection limit
- Max injection limit - limp mode
- Initialization values over pressure control valve
- J
- Injection 2
- Injection 3
- Torque limiter 2
- Boost pressure deviation limits for basic charge air pressure
- Boost pressure deviation limits for basic charge air pressure 2
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature for O2
- LSU temperature setpoint
- LSU temperature threshold PID heater governor activation
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter for diagnostics
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific pressure injection after starting
- Requested crankshaft/transmission torque
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Volumetric efficiency
- Volumetric efficiency - correction
- Turbocharger volumetric efficiency
- Turbocharger volumetric efficiency 2
- Variable geometry duty cycle limit
Firmware-identificatoren (14)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | 1037391721 |
1.67.007 | 1037391721 |
BOSCH EDC16CP39 |
| — | 1037391747 |
1.67.011 | 1037391747 |
BOSCH EDC16CP39 |
| — | 1037391746 |
1.67.009 | 1037391746 |
BOSCH EDC16CP39 |
| — | 1037391725 |
1.67.028 | 1037391725 |
BOSCH EDC16CP39 |
| — | 1037386062 |
1.67.009 | 1037391725 |
BOSCH EDC16CP39 |
| — | 1037386086 |
1.67.008 | 1037386099 |
BOSCH EDC16CP39 |
| — | 1037386097 |
1.67.011 | 1037391721 |
BOSCH EDC16CP39 |
| — | 1037386099 |
1.67.013 | 1037386099 |
BOSCH EDC16CP39 |
| — | 1037391745 |
1.67.013 | 1037391745 |
BOSCH EDC16CP39 |
| — | 1037386062 |
1.67.008 | 1037391747 |
BOSCH EDC16CP39 |
| — | 1037391743 |
1.67.019 | 1037391743 |
BOSCH EDC16CP39 |
| — | 1037386086 |
1.67.024 | 1037386086 |
BOSCH EDC16CP39 |
| 0281013209 | 1037386062 |
1.67.024 | 1037386062 |
BOSCH EDC16CP39 |
| 0281013666 | 1037386062 |
1.67.005 | 1037386086 |
BOSCH EDC16CP39 |
Technische voertuignotities
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU-notities
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Aanvullende modules beschikbaar
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
