Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 15 firmwareversies
Voertuiggegevens
| Merk | PEUGEOT |
| Model | 307 |
| Motor | 1.6L 16V HDI 80kW/110HP EDC16C34 |
| Standaard vermogen | 110 CV / 81 kW |
| Cilinderinhoud | 1600 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | BOSCH |
| Model | EDC16C34 |
| Geheugen / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Beschikbare tuning-opties:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure in aftertreatment modes
- Boost pressure F (temperature)
- EGR valve control
- Basic torque management at engine cranking
- Injection period
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Injection period in aftertreatment modes
- Max injection limit
- Max injection limit - limp mode
- J
- Injection in aftertreatment modes 1
- Injection in aftertreatment modes 2
- Injection in aftertreatment modes 3
- Torque limiter 2
- Torque limiter
- Lambda value of the smoke limitation
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 2
- Protection for fuel overheating
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Specific pressure injection after starting
- Air mass flow
- Driver torque request
- Driver torque request for high speed - AT
- Driver torque request for low speed - AT
- Driver torque request for reverse gear
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear - AT
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit in regeneration mode
Firmware-identificatoren (15)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | — |
1.67.033 | 1037376755 |
BOSCH EDC16C34 |
| — | — |
1.67.003 | 1037371084 |
BOSCH EDC16C34 |
| — | — |
1.67.013 | 1037375534 |
BOSCH EDC16C34 |
| — | — |
1.67.017 | 1037386115 |
BOSCH EDC16C34 |
| — | — |
1.67.044 | 1037380726 |
BOSCH EDC16C34 |
| — | — |
1.67.013 | 1037372085 |
BOSCH EDC16C34 |
| — | — |
1.67.017 | 1037380726 |
BOSCH EDC16C34 |
| — | — |
1.67.010 | 1037380732 |
BOSCH EDC16C34 |
| — | — |
1.67.027 | 1037375534 |
BOSCH EDC16C34 |
| — | — |
1.67.011 | 1037380735 |
BOSCH EDC16C34 |
| — | — |
1.67.007 | 1037380727 |
BOSCH EDC16C34 |
| — | — |
1.67.016 | 1037398210 |
BOSCH EDC16C34 |
| — | — |
1.67.028 | 1037375527 |
BOSCH EDC16C34 |
| — | — |
1.67.002 | 1037377751 |
BOSCH EDC16C34 |
| — | — |
1.67.014 | 1037395370 |
BOSCH EDC16C34 |
Technische voertuignotities
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU-notities
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Aanvullende modules beschikbaar
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
