PEUGEOT 307 1.6L 16V 83kW/111HP ME7.4.6

ECU BOSCH ME7.4.6 · 113 CV (83 kW) · 1600 cc · Benzina aspirato

ECU-databasePEUGEOT › PEUGEOT 307 1.6L 16V 83kW/111HP ME7.4.6

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 10 firmwareversies

Voertuiggegevens

MerkPEUGEOT
Model307
Motor1.6L 16V 83kW/111HP ME7.4.6
Standaard vermogen113 CV / 83 kW
Cilinderinhoud1600 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.4.6
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Load / throttle position reference
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Load/throttle position reference - AT
  • Air mass flow

Firmware-identificatoren (10)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612069431037374325 1.32.0079658476580 BOSCH ME7.4.6
02612069431037371008 1.32.0089656699180 BOSCH ME7.4.6
02612069431037371557 1.32.0119657823880 BOSCH ME7.4.6
02612069431037353688 1.32.0159645733380 BOSCH ME7.4.6
02612074741037367169 1.32.0109650346080 BOSCH ME7.4.6
02612074741037371546 1.32.0049657499780 BOSCH ME7.4.6
02612083011037369460 1.32.0059654823880 BOSCH ME7.4.6
02612083011037367770 1.32.0119650348080 BOSCH ME7.4.6
02612083011037375049 1.32.0029658519080 BOSCH ME7.4.6
02612083011037372841 1.32.0029657036780 BOSCH ME7.4.6

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial programming system NewGenius.