PEUGEOT 3008 (T84) 1.6L 16V HDI 82kW/110HP SID 807

ECU CONTINENTAL-SIEMENS-VDO SID807 · 111 CV (82 kW) · 1600 cc · Diesel sovralimentato

ECU-databasePEUGEOT › PEUGEOT 3008 (T84) 1.6L 16V HDI 82kW/110HP SID 807

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 22 firmwareversies

Voertuiggegevens

MerkPEUGEOT
Model3008 (T84)
Motor1.6L 16V HDI 82kW/110HP SID 807
Standaard vermogen111 CV / 82 kW
Cilinderinhoud1600 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantCONTINENTAL-SIEMENS-VDO
ModelSID807
Geheugen / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • BAP setpoint limitation depending on before particulate filter pressure in aftertreatment modes
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • Boost pressure 4
  • Load / throttle position reference
  • Exhaust gas temperature value before turbine in regular injection mode
  • Injection opening time related to inj. pressure
  • J
  • Torque limiter 2
  • Torque limiter
  • Intake manifold pressure
  • Throttle air mass flow calculation
  • Max torque profile
  • Specific injection pressure limiter
  • Specific injection pressure
  • Driver torque request for high speed
  • Driver torque request for medium speed
  • Driver torque request for low speed
  • Driver torque request at the start
  • Driver torque request for reverse gear
  • Torque limiter for EFT sensor
  • Torque limit table for ECT sensor
  • Torque model - fuel quantity to torque conversion
  • Variable geometry duty cycle limit

Firmware-identificatoren (22)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
96632414809666571380 1.83.0089679162480 CONTINENTAL-SIEMENS-VDO SID807
96632414809666571380 1.83.0169691576880 CONTINENTAL-SIEMENS-VDO SID807
96632414809666571380 1.83.0269667367080 CONTINENTAL-SIEMENS-VDO SID807
96632414809666571380 1.83.0239667344080 CONTINENTAL-SIEMENS-VDO SID807
96632414809666571380 1.83.0129679076080 CONTINENTAL-SIEMENS-VDO SID807
96632414809666571380 1.83.0269678928080 CONTINENTAL-SIEMENS-VDO SID807
96632414809666571380 1.83.0129679020080 CONTINENTAL-SIEMENS-VDO SID807
96632414809666681180 1.83.0089691737680 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0089679076180 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0099691833980 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0149679124480 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0169691762280 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0129691616680 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0149691834080 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0099691664580 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0139679127980 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0149679067480 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0119679127880 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0139691833780 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0119691576980 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0189678982480 CONTINENTAL-SIEMENS-VDO SID807EVO
96632414809666681180 1.83.0179679049680 CONTINENTAL-SIEMENS-VDO SID807EVO

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop