PEUGEOT 206 1.4L 8V 60kW/82HP ME7.4.4

ECU BOSCH ME7.4.4 · 82 CV (6 kW) · 1400 cc · Benzina aspirato

ECU-databasePEUGEOT › PEUGEOT 206 1.4L 8V 60kW/82HP ME7.4.4

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 7 firmwareversies

Voertuiggegevens

MerkPEUGEOT
Model206
Motor1.4L 8V 60kW/82HP ME7.4.4
Standaard vermogen82 CV / 6 kW
Cilinderinhoud1400 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.4.4
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Exhaust gas temperature
  • Lambda enrichment for components protection
  • RPM Limiter
  • Lambda driver wish
  • Knock detection factor
  • Optimal engine moment
  • Driver torque request
  • Driver torque request 2

Firmware-identificatoren (7)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612013821037380051 1.32.0129662307780 BOSCH ME7.4.4
02612013821037501374 1.32.0119666714980 BOSCH ME7.4.4
02612085861037377604 1.32.0069661379680 BOSCH ME7.4.4
0261S040991037501368 1.32.0049666715080 BOSCH ME7.4.4
0261S040991037397242 1.32.0039666195680 BOSCH ME7.4.4
0261S040991037389475 1.32.004 BOSCH ME7.4.4
0261S040991037389475 1.32.0059664378780 BOSCH ME7.4.4

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial programming system NewGenius.