PEUGEOT 1007 1.6L 16V 80kW/107HP ME7.4.5

ECU BOSCH ME7.4.5 · 109 CV (8 kW) · 1600 cc · Benzina aspirato

ECU-databasePEUGEOT › PEUGEOT 1007 1.6L 16V 80kW/107HP ME7.4.5

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkPEUGEOT
Model1007
Motor1.6L 16V 80kW/107HP ME7.4.5
Standaard vermogen109 CV / 8 kW
Cilinderinhoud1600 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.4.5
Geheugen / EPROMMICRO ST - 6656 Kbit

Beschikbare tuning-opties:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • Lambda enrichment for components protection
  • RPM Limiter
  • RPM Limiter 2
  • RPM limit for ECT sensor
  • Lambda driver wish
  • Knock detection factor
  • Throttle air mass flow calculation
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Offset tolerance depending on permissible torque 2
  • Relative permissible torque from the pedal position in torque limitation
  • Relative permissible torque from the pedal position in torque limitation 2
  • Driver torque request
  • Throttle angle management

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612089661037390433 1.88.0069664538280 BOSCH ME7.4.5

Technische voertuignotities

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU-notities

Microprocessor ST10F275 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius.