Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 12 firmwareversies
Voertuiggegevens
| Merk | OPEL / SATURN / VAUXHALL |
| Model | VIVARO B |
| Motor | 1.6L 16V dCi 107kW/143HP EDC17C84 |
| Standaard vermogen | 145 CV / 107 kW |
| Cilinderinhoud | 1600 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | LCV |
ECU
| Fabrikant | BOSCH |
| Model | EDC17C84 |
| Geheugen / EPROM | MICRO ST TRICORE - 20480 Kbit - 280000 |
Beschikbare tuning-opties:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure in aftertreatment modes
- Maximum torque limitation at clutch
- Effective engine torque setpoint for safety
- Max accepted exhaust gas temperature value after turbine
- Exhaust gas temperature value before turbine in regeneration mode
- Exhaust gas temperature value before turbine in regular injection mode
- Max accepted exhaust gas temperature value at particulate sensor
- Max torque correction factor for IAT sensor
- Max torque correction factor for IAT sensor 2
- Max torque correction factor for IAT sensor in aftertreatment modes
- Max torque correction factor for IAT sensor in aftertreatment modes 2
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Basic torque management at engine cranking 3
- Engine idle vs. ECT sensor
- Gearbox maximum torque allowed
- Injection period
- Injection opening time related to inj. pressure
- Injection period in aftertreatment modes 3
- Torque limiter
- Torque limiter for diagnostic
- Maximum absolute effective torque in ECO mode
- Maximum indicated torque
- Maximum indicated torque in regeneration mode
- Maximum indicated torque - safety condition
- Maximum indicated torque - safety condition 2
- Max exhaust gas temperature value before turbine in regeneration mode
- Max exhaust gas temperature value before turbine in regular injection mode
- Turbine temperature maximum value
- Specific injection pressure limiter
- Specific injection pressure limiter 4
- Specific injection pressure limiter in aftertreatment modes
- Specific injection pressure limiter for diagnostics
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Specific injection pressure in aftertreatment modes 2
- Driver torque request
- Driver torque request Sport mode
- Maximum temperature before turbine for diagnosis
- Temperature before turbine setpoint during npu, spu and injection mode
- Torque limiter for EFT sensor
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Torque limiter in recovery mode 3
- Torque model - fuel quantity to torque conversion
- Torque model - fuel quantity to torque conversion 2
- Torque model - fuel quantity to torque conversion in aftertreatment modes
- Torque model - torque to fuel quantity conversion
Firmware-identificatoren (12)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
| — | 10SW011008 |
1.94.012 | 10SW011008 |
BOSCH EDC17C84 |
| — | 10SW014336 |
1.94.010 | 10SW027279 |
BOSCH EDC17C84 |
| — | 10SW032702 |
1.94.010 | 10SW032702 |
BOSCH EDC17C84 |
| — | 10SW082584 |
1.94.010 | 10SW082584 |
BOSCH EDC17C84 |
| — | 10SW027279 |
1.94.013 | 10SW027279 |
BOSCH EDC17C84 |
| — | 10SW011004 |
1.94.016 | 10SW011004 |
BOSCH EDC17C84 |
| — | 10SW014336 |
1.94.012 | 10SW039575 |
BOSCH EDC17C84 |
| — | 10SW014336 |
1.94.011 | 10SW032700 |
BOSCH EDC17C84 |
| — | 10SW011175 |
1.94.013 | 10SW011175 |
BOSCH EDC17C84 |
| — | 1037556808 |
1.94.024 | 10SW003031 |
BOSCH EDC17C84 |
| — | 10SW014336 |
1.94.002 | 10SW027337 |
BOSCH EDC17C84 |
| — | 10SW014336 |
1.94.015 | 10SW032702 |
BOSCH EDC17C84 |
Technische voertuignotities
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU-notities
Microprocessor TC1782 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Aanvullende modules beschikbaar
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven