Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 4 firmwareversies
Voertuiggegevens
| Merk | OPEL / SATURN / VAUXHALL |
| Model | MOVANO B |
| Motor | 2.3L dCi 120kW/161HP SID309 |
| Standaard vermogen | 163 CV / 12 kW |
| Cilinderinhoud | 2300 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | LCV |
ECU
| Fabrikant | CONTINENTAL-SIEMENS-VDO |
| Model | SID309 |
| Geheugen / EPROM | MICRO ST TRICORE - 16384 Kbit - 200000 |
Beschikbare tuning-opties:
- Boost pressure limiter
- BAP setpoint limitation depending on before particulate filter pressure in aftertreatment modes
- Boost pressure in aftertreatment modes
- Boost pressure in regular injection mode
- Maximum torque limitation at clutch
- Effective engine torque setpoint
- Max accepted exhaust gas temperature value before turbine
- Exhaust gas temperature value before turbine in regeneration mode
- Exhaust gas temperature value before turbine in regular injection mode
- Engine torque limit for transmission protection
- Max torque correction factor for IAT sensor
- Max torque correction factor for IAT sensor in aftertreatment modes
- Basic torque management at engine cranking
- Injection opening time related to inj. pressure
- Maximum indicated torque
- Maximum indicated torque in regeneration mode
- Max exhaust gas temperature value before turbine in regeneration mode
- Max exhaust gas temperature value before turbine in regular injection mode
- Minimum filtered torque to allow learning
- Maximum particulate filter upstream temperature for diagnosis
- Specific injection pressure limiter
- Specific injection pressure limiter in aftertreatment modes
- Power limit torque table
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Mass air flow - gear 1 (N or R)
- Air mass flow
- Mass air flow - gear 3
- Mass air flow - gear 4
- Mass air flow - gear 5
- Mass air flow - gear 6
- Air mass flow in aftertreatment modes
- Maximum temperature before turbine for diagnosis
- Torque limiter for EFT sensor
- Torque limiter for intake manifold pressure
- Torque limiter for intake manifold pressure in regeneration mode
- Torque model - fuel quantity to torque conversion
- Torque model - torque to fuel quantity conversion
Firmware-identificatoren (4)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| 4246R | 5093R |
1.83.009 | 7110R |
CONTINENTAL-SIEMENS-VDO SID309 |
| 4246R | 5093R |
1.83.008 | 7112R |
CONTINENTAL-SIEMENS-VDO SID309 |
| 4246R | 5093R |
1.83.008 | 7111R |
CONTINENTAL-SIEMENS-VDO SID309 |
| 4246R | 5093R |
1.83.011 | 5954R |
CONTINENTAL-SIEMENS-VDO SID309 |
Technische voertuignotities
OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.
ECU-notities
MICRO Infineon Tricore TC1767 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
