OPEL / SATURN / VAUXHALL MERIVA B 1.4L 16V TURBO 103kW/140HP DELCO E83

ECU DELCO E83 · 140 CV (103 kW) · 1400 cc · Benzina sovralimentato

ECU-databaseOPEL / SATURN / VAUXHALL › OPEL / SATURN / VAUXHALL MERIVA B 1.4L 16V TURBO 103kW/140HP DELCO E83

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 3 firmwareversies

Voertuiggegevens

MerkOPEL / SATURN / VAUXHALL
ModelMERIVA B
Motor1.4L 16V TURBO 103kW/140HP DELCO E83
Standaard vermogen140 CV / 103 kW
Cilinderinhoud1400 cc
BrandstofBenzina sovralimentato
VoertuigtypeAuto

ECU

FabrikantDELCO
ModelE83
Geheugen / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5554 16384 Kbit - 0x200000

Beschikbare tuning-opties:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Boost pressure
  • Desired engine load calculation
  • Variable exhaust camshaft timing 2
  • Variable exhaust camshaft timing
  • ECT for fan engagement
  • Engine idle
  • Engine idle in Park position
  • Variable intake camshaft timing 2
  • Variable intake camshaft timing
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Throttle angle management
  • WG duty cycle vs RPM and boost

Firmware-identificatoren (3)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1264292612645537 1.91.00855588869 DELCO E83
1264292612659319 1.91.01555599603 DELCO E83
1264292612645537 1.35.00955589120 DELCO E83

Technische voertuignotities

OBD with lid located in the central tunnel under the parking brake lever.

ECU-notities

Microprocessor ST10F275 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop