Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 5 firmwareversies
Voertuiggegevens
| Merk | OPEL / SATURN / VAUXHALL |
| Model | CORSA D |
| Motor | 1.4L 16V TURBO 88kW/118HP ECOFLEX DELCO E78 |
| Standaard vermogen | 120 CV / 88 kW |
| Cilinderinhoud | 1400 cc |
| Brandstof | Benzina sovralimentato |
| Voertuigtype | Auto |
ECU
| Fabrikant | DELCO |
| Model | E78 |
| Geheugen / EPROM | MICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000 |
Beschikbare tuning-opties:
- Engine ignition timing versus temperature
- Advance at idle speed
- Lambda/AFR full load/WOT
- Optimal spark timing/MBT
- Spark advance correction for ECT sensor
- Requested spark advance - high octane
- Requested spark advance - low octane
- Boost pressure
- Desired engine load calculation
- Variable exhaust camshaft timing 2
- Variable exhaust camshaft timing
- ECT for fan engagement
- Engine idle
- Engine idle in Park position
- Variable intake camshaft timing 2
- Variable intake camshaft timing
- Torque limiter 2
- Torque limiter
- Lambda enrichment - open loop
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Throttle angle management
- WG duty cycle vs RPM and boost
Firmware-identificatoren (5)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| 12647136 | 12654130 |
1.91.007 | 55591667 |
DELCO E78 |
| 12647136 | 12647732 |
1.91.007 | 55588511 |
DELCO E78 |
| 12647136 | 12654130 |
1.91.006 | 55598590 |
DELCO E78 |
| 12647136 | 12659378 |
1.35.008 | 55485095 |
DELCO E78 |
| 12666362 | 12680882 |
1.00.002 | 55498758 |
DELCO E80 |
Technische voertuignotities
OBD with lid located in the central tunnel, ion the tray between the gear lever and the air conditioning controls.
ECU-notities
Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual. To work on this ECU you can use NewTrasdata
Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
