NISSAN NOTE (E12) 1.5L dCi 66kW/89HP EDC17C84

ECU BOSCH EDC17C84 · 90 CV (66 kW) · 1500 cc · Diesel sovralimentato

ECU-databaseNISSAN › NISSAN NOTE (E12) 1.5L dCi 66kW/89HP EDC17C84

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkNISSAN
ModelNOTE (E12)
Motor1.5L dCi 66kW/89HP EDC17C84
Standaard vermogen90 CV / 66 kW
Cilinderinhoud1500 cc
BrandstofDiesel sovralimentato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelEDC17C84
Geheugen / EPROMMICRO ST TRICORE - 20480 Kbit - 280000

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Boost pressure in aftertreatment modes
  • Maximum torque limitation at clutch
  • Effective engine torque setpoint for safety
  • Max accepted exhaust gas temperature value after turbine
  • Exhaust gas temperature value before turbine in regeneration mode
  • Exhaust gas temperature value before turbine in regular injection mode
  • Max accepted exhaust gas temperature value at particulate sensor
  • Max torque correction factor for IAT sensor
  • Max torque correction factor for IAT sensor 2
  • Max torque correction factor for IAT sensor in aftertreatment modes
  • Max torque correction factor for IAT sensor in aftertreatment modes 2
  • Basic torque management at engine cranking
  • Basic torque management at engine cranking 2
  • Basic torque management at engine cranking 3
  • Engine idle vs. ECT sensor
  • Gearbox maximum torque allowed
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection period in aftertreatment modes
  • Torque limiter
  • Torque limiter for diagnostic
  • Maximum absolute effective torque in ECO mode
  • Maximum indicated torque
  • Maximum indicated torque in regeneration mode
  • Maximum indicated torque in regeneration mode 2
  • Maximum indicated torque - safety condition
  • Max exhaust gas temperature value before turbine in regeneration mode
  • Max exhaust gas temperature value before turbine in regular injection mode
  • Turbine temperature maximum value
  • Specific injection pressure limiter
  • Specific injection pressure limiter 4
  • Specific injection pressure limiter in aftertreatment modes
  • Specific injection pressure limiter for diagnostics
  • Maximum pressure ratio limit depending on temperature
  • Specific injection pressure
  • Specific injection pressure in aftertreatment modes
  • Specific injection pressure in aftertreatment modes 2
  • Air mass flow in aftertreatment modes
  • Driver torque request
  • Driver torque request Sport mode
  • Maximum temperature before turbine for diagnosis
  • Temperature before turbine setpoint during npu, spu and injection mode
  • Torque limiter for EFT sensor
  • Torque limiter in recovery mode
  • Torque model - fuel quantity to torque conversion
  • Torque model - fuel quantity to torque conversion 2
  • Torque model - fuel quantity to torque conversion in aftertreatment modes
  • Torque model - torque to fuel quantity conversion

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1037552803 1.94.01110SW000400 BOSCH EDC17C84
10SW005460 1.94.00910SW007165 BOSCH EDC17C84
10SW018239 1.94.02210SW018239 BOSCH EDC17C84
10SW018239 1.94.00410SW018239 BOSCH EDC17C84

ECU-notities

Microprocessor TC1782 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata