NISSAN NAVARA/FRONTIER (D40) 2.5L dCi 120kW/161HP DENSO D3 SH7058

ECU DENSO D3 NISSAN · 163 CV (12 kW) · 2500 cc · Diesel sovralimentato

ECU-databaseNISSAN › NISSAN NAVARA/FRONTIER (D40) 2.5L dCi 120kW/161HP DENSO D3 SH7058

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 5 firmwareversies

Voertuiggegevens

MerkNISSAN
ModelNAVARA/FRONTIER (D40)
Motor2.5L dCi 120kW/161HP DENSO D3 SH7058
Standaard vermogen163 CV / 12 kW
Cilinderinhoud2500 cc
BrandstofDiesel sovralimentato
VoertuigtypeLCV

ECU

FabrikantDENSO
ModelD3 NISSAN
Geheugen / EPROMMicro RENESAS - 8192 Kbit -100000

Beschikbare tuning-opties:

  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Load / throttle position reference
  • Desired boost pressure
  • Maximum injection quantity
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Specific injection pressure
  • Specific injection pressure 2

Firmware-identificatoren (5)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
E30VU4D_T2G2342015 1.21.007 DENSO D3 NISSAN
E311U4D_T2H23422A7 1.21.006 DENSO D3 NISSAN
E311U4D_T2H2342017 1.00.008 DENSO D3 NISSAN
E311U4D_T2H2D22016 1.00.003 DENSO D3 NISSAN
E312W4D_T3I1842A41 1.21.004 DENSO D3 NISSAN

Technische voertuignotities

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU-notities

Microprocessor SH7058 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop