Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 21 firmwareversies
Voertuiggegevens
| Merk | NEW HOLLAND AGRICULTURE |
| Model | T8 |
| Motor | T8.360 8.7L 255kW/342HP EDC7UC31 |
| Standaard vermogen | 347 CV / 255 kW |
| Cilinderinhoud | 8700 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Tractor |
ECU
| Fabrikant | BOSCH |
| Model | EDC7UC31 |
| Geheugen / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Beschikbare tuning-opties:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure 2
- Boost pressure F (temperature)
- Desired fuel quantity map for open loop
- EGR valve control
- Exhaust gas temperature
- Max CAT temperature threshold for component protection
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection opening time related to inj. pressure
- Injection mass at high temperature
- Injection mass at low temperature
- Maximum fuel quantity for turbine overspeed prevention
- Injection limit - turbocharger protection
- Max injection limit
- Max injection limit 2
- Fuel quantity limitation after cold start
- Max injection limit - limp mode
- L
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- MAP - limp home mode
- Maximum indicated torque
- Max torque profile
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 2
- Protection for fuel overheating
- Specific injection pressure limiter
- Specific injection pressure limiter for diagnostics
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure in aftertreatment modes
- Driver torque request
- Torque limiter for selected gear
- Torque limiter in recovery mode
- Torque model - torque to fuel quantity conversion
- Torque model for performance limiter
- Torque model with performance limiter stage 1 is active
- Torque model with performance limiter stage 2 active
- Torque model with performance limiter after coldstart 1 active
- Torque model with performance limiter stage 3 active
- Turbocharger volumetric efficiency
Firmware-identificatoren (21)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | — |
1.67.007 | P340VF01 Mxkayg26.ck4 |
BOSCH EDC7UC31 |
| — | — |
1.67.008 | P340VF01 Mxkayg26.ck4 |
BOSCH EDC7UC31 |
| — | — |
1.67.009 | P340VF01 Mxkayg27.ck3 |
BOSCH EDC7UC31 |
| — | — |
1.67.006 | P340VF01 Mxkayg25.ck3 |
BOSCH EDC7UC31 |
| — | — |
1.67.008 | P340VF01 Mxkayg23.ck4 |
BOSCH EDC7UC31 |
| — | — |
1.67.003 | P340VF01 Mxkayg26.ck3 |
BOSCH EDC7UC31 |
| — | — |
1.67.006 | P340VD03 Mxkayb07.ck1 |
BOSCH EDC7UC31 |
| — | — |
1.67.008 | P340VE02 Mxkayc17.ck4 |
BOSCH EDC7UC31 |
| — | — |
1.67.008 | P340VF01 Mxkayg25.ck4 |
BOSCH EDC7UC31 |
| — | — |
1.67.008 | P340VD03 Mxkayb04.ck1 |
BOSCH EDC7UC31 |
| — | — |
1.67.006 | P340VF01 Mxkjyg26.ck4 |
BOSCH EDC7UC31 |
| — | — |
1.67.009 | P340VD03 Mxkayb07.ck1 |
BOSCH EDC7UC31 |
| — | — |
1.67.007 | P340VF01 Mxkayg27.ck4 |
BOSCH EDC7UC31 |
| — | — |
1.67.007 | P340VF01 Mxkjyg27.ck4 |
BOSCH EDC7UC31 |
| — | — |
1.67.012 | P340VF01 Mxkjyg27.ck3 |
BOSCH EDC7UC31 |
| — | — |
1.67.009 | P340VF01 Mxkjyg27.ck3 |
BOSCH EDC7UC31 |
| — | — |
1.67.007 | P340VF01 Mxkayg25.ck4 |
BOSCH EDC7UC31 |
| — | — |
1.67.012 | P340VF01 Mxkayg23.ck3 |
BOSCH EDC7UC31 |
| — | — |
1.33.007 | P340VF01 Mxkayg22.ck3 |
BOSCH EDC7UC31 |
| — | — |
1.67.012 | P340VF01 Mxkayg21.ck3 |
BOSCH EDC7UC31 |
| — | — |
1.67.012 | P340VE02 Mxkayc17.ck3 |
BOSCH EDC7UC31 |
ECU-notities
To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
