MORGAN AERO 8 4.4L V8 32V 210kW/282HP DME7.1

ECU BOSCH DME 7.1 · 286 CV (21 kW) · 4400 cc · Benzina aspirato

ECU-databaseMORGAN › MORGAN AERO 8 4.4L V8 32V 210kW/282HP DME7.1

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 2 firmwareversies

Voertuiggegevens

MerkMORGAN
ModelAERO 8
Motor4.4L V8 32V 210kW/282HP DME7.1
Standaard vermogen286 CV / 21 kW
Cilinderinhoud4400 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelDME 7.1
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Load/throttle position reference - AT
  • Air mass flow
  • Driver torque request

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612046201037351598 1.19.001 BOSCH DME 7.1
02612071061037351598 1.19.004 BOSCH DME 7.1

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!