Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.
✓ Tuning via bestand (flash)
✓ Aanvullende module beschikbaar 7 firmwareversies
Voertuiggegevens
| Merk | MINI |
| Model | R60 COUNTRYMAN |
| Motor | 1.6L 16V ONE D 66kW/88HP EDC17C41 |
| Standaard vermogen | 90 CV / 66 kW |
| Cilinderinhoud | 1600 cc |
| Brandstof | Diesel sovralimentato |
| Voertuigtype | Auto |
ECU
Beschikbare tuning-opties:
- Boost pressure limiter
- Boost pressure
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- EGR valve control 5
- Max accepted exhaust gas temperature value at particulate sensor
- Exhaust gas temperature threshold for component protection
- Protection for engine overheating
- Protection for engine overheating 2
- Protection for engine overheating 3
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Gearbox maximum torque allowed 2
- Injection period
- Injection period 2
- Injection period 3
- Maximum injection period
- Injection opening time related to inj. pressure
- Injection 1
- J
- Injection 3
- Injection 4
- L
- Torque limiter 3
- Torque limiter 4
- Torque limiter 5
- Torque limiter
- Torque limiter for diagnostic
- Torque limiter for diagnostic 2
- Torque limiter during particulate filter overloading - pressure
- Torque limiter during particulate filter overloading - temperature
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature setpoint
- LSU temperature threshold PID heater governor activation
- Speed limiter
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Maximum engine torque at crank shaft
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter 3
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Driver torque request
- CAT upstream temperature sensor characterization
- DPF upstream temperature sensor characterization
- SCR upstream temperature sensor characterization
- Torque limiter for EFT sensor
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
- Variable geometry duty cycle limit 4
Firmware-identificatoren (7)
| Hardware-nr. | Software-nr. (chip) | Versie | Update-software | ECU |
|---|
| — | 08583423 |
1.00.026 | 08591038 |
BOSCH EDC17C41 (DDE701/721) |
| — | 08506666 |
1.00.030 | 08514401 |
BOSCH EDC17C41 (DDE701/721) |
| — | 08519663 |
1.00.023 | 08519791 |
BOSCH EDC17C41 (DDE701/721) |
| — | 08471788 |
1.00.040 | 08471978 |
BOSCH EDC17C41 (DDE701/721) |
| — | 08576988 |
1.00.025 | 08581319 |
BOSCH EDC17C41 (DDE701/721) |
| — | 08583423 |
1.00.022 | 08584160 |
BOSCH EDC17C41 (DDE701/721) |
| — | 08583423 |
1.00.027 | 08584160 |
BOSCH EDC17C41 (DDE701/721) |
Technische voertuignotities
ECU located in the engine bay on the driver'side. Difficulty: easy.
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU-notities
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Verkrijg het bestand voor dit voertuig
Tools om deze ECU te lezen en schrijven
