MERCURY MARINE MARINE ENGINE 4.2L TDI 272kW/365HP EDC16CP34

ECU BOSCH EDC16U31/U34/CP34 · 370 CV (272 kW) · 4200 cc · Diesel sovralimentato

ECU-databaseMERCURY MARINE › MERCURY MARINE MARINE ENGINE 4.2L TDI 272kW/365HP EDC16CP34

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 2 firmwareversies

Voertuiggegevens

MerkMERCURY MARINE
ModelMARINE ENGINE
Motor4.2L TDI 272kW/365HP EDC16CP34
Standaard vermogen370 CV / 272 kW
Cilinderinhoud4200 cc
BrandstofDiesel sovralimentato
VoertuigtypeMarine

ECU

FabrikantBOSCH
ModelEDC16U31/U34/CP34
Geheugen / EPROMAm29BDD160G PQFP80 - Flash 3_V 512 x 32

Beschikbare tuning-opties:

  • Boost pressure limiter
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure 2
  • Boost pressure 3
  • Load / throttle position reference
  • EGR valve control
  • EGR valve control 2
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Injection period
  • Injection period - correction
  • Injection opening time related to inj. pressure
  • J
  • Torque limiter 2
  • Lambda value of the smoke limitation
  • Minimum LSU sensor temperature limit - heater control
  • Minimum LSU sensor temperature for O2
  • Maximum LSU sensor temperature limit - heater control
  • Maximum LSU sensor temperature for O2
  • LSU temperature threshold PID heater governor activation
  • Protection for air load overheating
  • Specific injection pressure limiter
  • Specific injection pressure
  • Q
  • Driver torque request
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for for reverse gear
  • Torque limiter for the APS/BPS
  • Torque limiter in recovery mode
  • Turbocharger volumetric efficiency
  • Variable geometry duty cycle limit

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
1.67.02105B906005 V254 BOSCH EDC16U31/U34/CP34
1.67.01105B910401 V085 BOSCH EDC16U31/U34/CP34

ECU-notities

Original EPROM Am29BDD160G PQFP 80 Pin - Microprocessor Motorola MPC56x. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata