MERCEDES TRUCK ACTROS 1851 16L V8 375kW/503HP TEMIC — ECU TEMIC TEMIC PLD

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 9 firmwareversies

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand

Ben je een garage of tuner?

Voertuiggegevens

Merk	MERCEDES TRUCK
Model	ACTROS
Motor	1851 16L V8 375kW/503HP TEMIC
Standaard vermogen	510 CV / 375 kW
Cilinderinhoud	16000 cc
Brandstof	Diesel sovralimentato
Voertuigtype	Tir

ECU

Fabrikant	TEMIC
Model	TEMIC PLD
Geheugen / EPROM	29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

Max threshold air mass flow throught compressor
Boost pressure limiter
Protection for engine overheating
Protection for engine overheating 2
Protection for engine overheating 3
Basic torque management at engine cranking
Engine idle vs. ECT sensor
Injection angle
Injection angle 2
Injection angle - correction
Injection delivery angle
Smoke limiter
Maximum indicated torque
Max torque profile

Firmware-identificatoren (9)

Hardware-nr.	Software-nr. (chip)	Versie	Update-software	ECU
—	07B	1.54.013	—	TEMIC TEMIC PLD
—	10B	1.54.016	—	TEMIC TEMIC PLD
—	22B	1.00.010	—	TEMIC TEMIC PLD
—	05A	1.54.015	—	TEMIC TEMIC PLD
—	09D	1.54.014	—	TEMIC TEMIC PLD
—	24B	1.54.009	—	TEMIC TEMIC PLD
—	24C	1.54.006	—	TEMIC TEMIC PLD
—	23E	1.54.007	—	TEMIC TEMIC PLD
—	11C	1.54.011	—	TEMIC TEMIC PLD

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it. On this epron can be set a KEY.

This Setting File can be used for serial system NewGenius.

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand Ben je een garage of tuner?Bied deze diensten zelf aan: activeer je TuningFile-platform

Tools om deze ECU te lezen en schrijven

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Kopen

The Genius OBD + Bench € 2.500 Kopen

Andere MERCEDES TRUCK

1853
15L V8 390kW/523HP MS5 ACTROS
1843 12L V6 315kW/422HP TEMIC ACTROS
1848 16L V8 350kW/473HP TEMIC ACTROS
1853 16L V8 390kW/523HP TEMIC ACTROS
1857 16L V8 419kW/565HP TEMIC 2053
22.6L V12 390kW/523HP MS5 ACTROS
1831 12L V6 235kW/315HP TEMIC ACTROS
4143 12L V6 320kW/429HP TEMIC 2638
18L V10 280kW/375HP MS5 1844
10.9L V6 324kW/434HP MS5

→ Alle ECU's MERCEDES TRUCK