MAZDA 3 (BM) 2.5L 16V SKYACTIV-G 135kW/181HP DENSO

ECU DENSO MB_MH8501_GGD · 184 CV (135 kW) · 2500 cc · Benzina aspirato

ECU-databaseMAZDA › MAZDA 3 (BM) 2.5L 16V SKYACTIV-G 135kW/181HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 6 firmwareversies

Voertuiggegevens

MerkMAZDA
Model3 (BM)
Motor2.5L 16V SKYACTIV-G 135kW/181HP DENSO
Standaard vermogen184 CV / 135 kW
Cilinderinhoud2500 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDENSO
ModelMB_MH8501_GGD
Geheugen / EPROMMICRO MITSUBISHI - 16384 Kbit - 200000

Beschikbare tuning-opties:

  • Base timing
  • Minimum advance allowed
  • Minimum advance allowed - high octane
  • Minimum advance allowed - low octane
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Enrichment for closed loop
  • Exhaust gas temperature
  • Engine idle vs. ECT sensor
  • Engine idle vs. ECT sensor 2
  • High pressure fuel pump setpoint
  • High pressure fuel pump setpoint for ECT sensor
  • RPM Limiter
  • RPM Limiter 2
  • Speed limiter
  • MAF calibration vs voltage
  • Max torque profile
  • Max torque profile in Sport mode
  • Enrichment for open loop
  • Specific injection pressure
  • Driver torque request
  • Throttle angle management
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Firmware-identificatoren (6)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
P502-188K1-PYGX-18881- 1.21.020PYGX-188K2- DENSO MB_MH8501_GGD
P51H-188K1-PY8E-18881-C 1.21.007PY8E-188K2-C DENSO MB_MH8501_GGD
PE18-188K1-PYBE-18881-A 1.00.008PYBE-188K2-A DENSO MB_MH8501_GGD
PELW-188K1-PYKN-18881-C 1.21.015PYKN-188K2-C DENSO MB_MH8501_GGD
PENA-188K1-PYKH-18881-C 1.00.009PYKH-188K2-C DENSO MB_MH8501_GGD
PSAE-188K1-PYKB-18881-D 1.21.006PYKB-188K2-D DENSO MB_MH8501_GGD

ECU-notities

Microprocessor MH8501F This Setting File can be used for serial system NewGenius.