LOTUS EXIGE S2 CUP 260 1.8L 16V TOYOTA 191kW/256HP EFI T4E

ECU EFI T4E · 260 CV (191 kW) · 1800 cc · Benzina aspirato

ECU-databaseLOTUS › LOTUS EXIGE S2 CUP 260 1.8L 16V TOYOTA 191kW/256HP EFI T4E

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) ✓ Aanvullende module beschikbaar 3 firmwareversies

Voertuiggegevens

MerkLOTUS
ModelEXIGE S2
MotorCUP 260 1.8L 16V TOYOTA 191kW/256HP EFI T4E
Standaard vermogen260 CV / 191 kW
Cilinderinhoud1800 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantEFI
ModelT4E
Geheugen / EPROMMICRO BGA CON FLASH A BORDO 512K - 80000

Beschikbare tuning-opties:

  • Base timing
  • Camshaft maximum lift high load
  • Camshaft maximum lift low load
  • Lambda correction
  • Intake cam advance (High)
  • Intake cam advance (Low)
  • Main injection
  • Fan activation threshold stage 1
  • Fan activation threshold stage 2
  • Fan activation threshold with engine off
  • Throttle angle limitation
  • Throttle angle management
  • Volumetric efficiency

Firmware-identificatoren (3)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
A120E6501FA128E0036 1.00.016 EFI T4E
A120E6501FA128E0056 1.00.006 EFI T4E
B120E6501FA128E0102 1.00.004 EFI T4E

ECU-notities

MICRO MPC563 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. Warning! to properly exclude the lambda probe 2, after running the patch LAM2, you must disconnect the connector of lambda probe 2 after the cat.

Aanvullende modules beschikbaar

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop